⭐Operation:
1. Remove the stopper from your sink.
2. Turn your water on. Allow cold water from tap (moderate or strong flow) to run into disposer.
3. Turn on the air switch to start disposer.
4. Slowly insert food waste while the disposer is on until the waste matter has cleared your drain.
5. Keep the disposer grinding for another 10 seconds, ad run water for few seconds to flush drain line.
6. Turn off the air switch and then the water.
⭐Specification:
Voltage: 110V
Rated speed: 2600r / min
Material: 304 stainless steel
Package size: 24cm*24cm*41cm
Weight: 5.5kg
⭐ Package Include:
1*Food Waste Disposer
⭐Attention:
1. Please thoroughly read this manual before installation and install the machine according to the local drainage electrical code.
2. The read overload protector at the bottom of the unit should be touchable.
3. The master power supply must adopt double-pole switch and the gap between the poles should beyond 3mm.
4. The power supply must be grounded. What's more, water pipe and gas pipe couldn't be used as grounding conductor or it will cause security incidents.
110V Household Food Waste Processor Kitchen Garbage Disposal Crusher…
⭐Operation:
1. Remove the stopper from your sink.
2. Turn your water on. Allow cold water from tap (moderate or strong flow) to run into disposer.
3. Turn on the air switch to start disposer.
4. Slowly insert food waste while the disposer is on until the waste matter has cleared your drain.
5. Keep the disposer grinding for another 10 seconds, ad run water for few seconds to flush drain line.
6. Turn off the air switch and then the water.
⭐Specification:
Voltage: 110V
Rated speed: 2600r / min
Material: 304 stainless steel
Package size: 24cm*24cm*41cm
Weight: 5.5kg
⭐ Package Include:
1*Food Waste Disposer
⭐Attention:
1. Please thoroughly read this manual before installation and install the machine according to the local drainage electrical code.
2. The read overload protector at the bottom of the unit should be touchable.
3. The master power supply must adopt double-pole switch and the gap between the poles should beyond 3mm.
4. The power supply must be grounded. What's more, water pipe and gas pipe couldn't be used as grounding conductor or it will cause security incidents.
in next 2 weeks
