1/4" A-1 600/700TVL TDN

jds flying canuck here and uh i just finished repairing this little jet i'll go through and show you what i did um this is the servo that i ordered this is only a three wire servo and this jet has a five wire servo and what happened was the motor and it went right you can see that little piece at the end right here right the motor's in that in there so what i did was take the screws off see the little screw there right the screw up there and i took the screw off the other end there anyways and i changed the receiver just in case and it was the receiver was defective too okay so the way i went through that was i pulled this off it's all glued back but you can pull this off you get a knife and go around the corner and i cut see what the servo is i had to cut this piece off here you can see all the glue i put back on there right but you've got to cut this in pieces don't worry about it you