Description

Features :

Pair Autotek ATS693 6x9" 800 Watt 3-Way Car Coaxial Speakers
Surround: UV Resistant Rubber Surround Moisture Resistant Rubber Surround With High Mid-Bass Impact
Cone: Silver Alpha-Cellulose Polypropylene Cones - Treated Pressed Paper Cone. Produces Musical Midrange And Bass Tones While Remaining Light Weight
Gasket: Textured Abs Assures A Ridged Linear Seal To The Mounting Surface
Tinsel Leads: Braided Highly Conductive While Remain Flexible During High Power Applications
Voice Coil: Pure Copper Creates Strong Magnetic Field With A Very Thin Extrusion
Voice Coil Former: Kapton, Lightweight And Efficiently Dissipates Heat
Spider: Epoxy Infused Natural Fiber Allows Flexibility While The Epoxy Which Gives Strength During The Manufacturing Process
Cooling System: Over-Coil, Air Is Exchanged Over The Voice Coil Through The Spider
Crossover Type: Passive Butterworth, Smooth Transition Of Frequencies From Midrange/Midbass To The Tweeter Element
Crossover Special: 6db Internal Integrated Into The Design To Assure Smooth Midrange To Tweeter Frequency Transitions
Frame: Anti-Resonant Stamped Steel Frame. Very Strong With Minimal Harmonics Or Distortions From Flex Or Ringing
Motor: Ferrite Magnet Creates A Strong Magnetic Field While Remaining Small Enough To Fit Nearly Every Application
Connectors: Use Spade Connectors Or Solder Direct For The Best Connection
Grills: Protects The Speaker From Accidental Damage. Not Used If Speaker Is Mounted Behind Vehicle Panel
Tweeter Material: Neo-Mylar Soft Dome Great Sound Quality And Increased Reliability
Tweeter Size: 1 Inch Clear Highs While Handling Plenty Of Power Without Sounding Harsh
Tweeter Surround Material: Kapton Lightweight And Efficiently Dissipates Heat
METRA 72-4568 Speaker Connector Adapter Harness For 1984-2013 Select GM Vehicles

1997-2003 Chevrolet Chevy Malibu Autotek Rear Factory Speaker Replacement Kit

Price is below average

Get price

Current Price

$32.95

Average

$34.7

Min Price

$29.09

Max Price

$50.89

Price dynamics

Description

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video. In this video, I'm going to show you how to remove as well as replace an inside door handle on this 2001 Chevy Malibu, same as any '97 to '03. I'll show you the driver's side. It's very similar for the passenger's side. Tools you'll need are: a flat blade screwdriver, Phillips screwdriver and 7mm socket with a ratchet and extension. Take an 8mm wrench, disconnect your negative battery cab