Description
:MOST IMPORTANT:
1. Circuit breaker should be larger than 32 amps, the electric wire should be 8, 9, or 10AWG, FOR SAFE USE, PLEASE PAY ATTENTION
2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW
3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.
4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY
Specifications:
Material: Stainless Steel Shell
Color: Black
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Water pipe interface: G 1/2" interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch
Package Included:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual
Note:
Please note this item should get the water first and then link the electricity when installing.
1. Circuit breaker should be larger than 32 amps, the electric wire should be 8, 9, or 10AWG, FOR SAFE USE, PLEASE PAY ATTENTION
2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW
3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.
4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY
Specifications:
Material: Stainless Steel Shell
Color: Black
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Water pipe interface: G 1/2" interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch
Package Included:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual
Note:
Please note this item should get the water first and then link the electricity when installing.
3000W Mini Electric Tankless Instant Hot Water Heater with LCD Display for Home Bathroom Kitchen Washing US Plug 110V (Black)
Price is below average
Current Price
$60
Average
$63.2
Min Price
$57.99
Max Price
$89.49
Price dynamics
5%
Description
:MOST IMPORTANT:
1. Circuit breaker should be larger than 32 amps, the electric wire should be 8, 9, or 10AWG, FOR SAFE USE, PLEASE PAY ATTENTION
2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW
3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.
4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY
Specifications:
Material: Stainless Steel Shell
Color: Black
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Water pipe interface: G 1/2" interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch
Package Included:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual
Note:
Please note this item should get the water first and then link the electricity when installing.
1. Circuit breaker should be larger than 32 amps, the electric wire should be 8, 9, or 10AWG, FOR SAFE USE, PLEASE PAY ATTENTION
2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW
3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.
4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY
Specifications:
Material: Stainless Steel Shell
Color: Black
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Water pipe interface: G 1/2" interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch
Package Included:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual
Note:
Please note this item should get the water first and then link the electricity when installing.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
