- HomeToys & GamesHobbiesRemote & App Controlled Vehicles & PartsRemote & App Controlled VehiclesQuadcopters & Multirotors
Description
After trying out many different motors, these were chosen because they are the best combination of speed and flight time. With a suitable battery upgrade (200mAh or higher) and the Inductrix LVC mod, these motors will keep an Inductrix-based Tiny Whoop airborne for 4 minutes and 30 seconds with the FPV camera powered on and transmitting video at 25 milliwatts.
If you will be installing these on a Blade Nano QX FPV, remember that wire colors are the opposite of the wires on Blade's stock motors. These motors will also fit the original (non-FPV) Nano QX, but it will not hover smoothly in Stability Mode because of the extreme power-to-weight ratio.
Can diameter: 6mm
Can length: 15mm
Shaft length: 5mm
Shaft diameter: 0.8mm
Wire length: 70mm
Weight (1 motor): 1.8g
Connector: Micro JST 1.25mm
Red and blue wires=clockwise (CW)
Black and white wires=counter-clockwise (CCW)
It is recommended that you hover for 5-6 minutes to break the motors in. Then, have fun!
If you will be installing these on a Blade Nano QX FPV, remember that wire colors are the opposite of the wires on Blade's stock motors. These motors will also fit the original (non-FPV) Nano QX, but it will not hover smoothly in Stability Mode because of the extreme power-to-weight ratio.
Can diameter: 6mm
Can length: 15mm
Shaft length: 5mm
Shaft diameter: 0.8mm
Wire length: 70mm
Weight (1 motor): 1.8g
Connector: Micro JST 1.25mm
Red and blue wires=clockwise (CW)
Black and white wires=counter-clockwise (CCW)
It is recommended that you hover for 5-6 minutes to break the motors in. Then, have fun!
3rd Coast Drones 60,000 RPM (16,200Kv) race motors for Tiny Whoop, Nano QX FPV, Inductrix FPV
Current Price
$6.5
Average
$6.5
Min Price
$6.5
Max Price
$6.5
Description
After trying out many different motors, these were chosen because they are the best combination of speed and flight time. With a suitable battery upgrade (200mAh or higher) and the Inductrix LVC mod, these motors will keep an Inductrix-based Tiny Whoop airborne for 4 minutes and 30 seconds with the FPV camera powered on and transmitting video at 25 milliwatts.
If you will be installing these on a Blade Nano QX FPV, remember that wire colors are the opposite of the wires on Blade's stock motors. These motors will also fit the original (non-FPV) Nano QX, but it will not hover smoothly in Stability Mode because of the extreme power-to-weight ratio.
Can diameter: 6mm
Can length: 15mm
Shaft length: 5mm
Shaft diameter: 0.8mm
Wire length: 70mm
Weight (1 motor): 1.8g
Connector: Micro JST 1.25mm
Red and blue wires=clockwise (CW)
Black and white wires=counter-clockwise (CCW)
It is recommended that you hover for 5-6 minutes to break the motors in. Then, have fun!
If you will be installing these on a Blade Nano QX FPV, remember that wire colors are the opposite of the wires on Blade's stock motors. These motors will also fit the original (non-FPV) Nano QX, but it will not hover smoothly in Stability Mode because of the extreme power-to-weight ratio.
Can diameter: 6mm
Can length: 15mm
Shaft length: 5mm
Shaft diameter: 0.8mm
Wire length: 70mm
Weight (1 motor): 1.8g
Connector: Micro JST 1.25mm
Red and blue wires=clockwise (CW)
Black and white wires=counter-clockwise (CCW)
It is recommended that you hover for 5-6 minutes to break the motors in. Then, have fun!
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products