Description
Features
Convert AC input selected by switch
Over-voltage , over current , short circuit protection
Heat from the cold
100% full load burn-in test
Low-cost , high reliability
Description Product
Output Voltage DC: 24V
Voltage Output: +/-1%
Output Current Rated: 3A
Current Range Output: 0~3A
And Noise Wave: 100mVp-p
Stability Inlet: +/-0.5%
Stability Load: +/-.5%
Output Power DC: 75W
Efficiency: 82%
Range for DC Voltage Adiustable: +/-10%
Voltage Input: 100~240V 47~63HZ
Current 1.6A/115VAC: 0.8A/230VAC Input
Current Leakage: <0.5mA/240VAC
Inrush Current AC: Start Current 18A/115V 36A/230V Cold
Protection Overload: Shut off current automatically, restore 105%~150%
Voltage Protection Over: voltage 105%~150%
Output Coefficient Temperature: +/-0.03%/ degrees C (0~50 degrees C)
Setup, Rise, up time Hold: 200ms, 100ms, 30ms
Voltage Withstand: and output internal input: and enclosure 1.5KVAC: output, and enclosure Input: 0.5KVAC
Temperature and Humidity Working: -10 degrees C~+60 degrees C, 20%~90%RH
Temperature and Humidity Store: -20 degrees C~+85
degrees C, 10%~95%RH
Weight: 0.3kg
Small volume Switching Mode Power Supply 3A 75W Transformer AC 100~240V to 24VDC
Current Price
$32.88
Average
$32.88
Min Price
$32.88
Max Price
$32.88
Price dynamics
0%
Description
Features
Convert AC input selected by switch
Over-voltage , over current , short circuit protection
Heat from the cold
100% full load burn-in test
Low-cost , high reliability
Description Product
Output Voltage DC: 24V
Voltage Output: +/-1%
Output Current Rated: 3A
Current Range Output: 0~3A
And Noise Wave: 100mVp-p
Stability Inlet: +/-0.5%
Stability Load: +/-.5%
Output Power DC: 75W
Efficiency: 82%
Range for DC Voltage Adiustable: +/-10%
Voltage Input: 100~240V 47~63HZ
Current 1.6A/115VAC: 0.8A/230VAC Input
Current Leakage: <0.5mA/240VAC
Inrush Current AC: Start Current 18A/115V 36A/230V Cold
Protection Overload: Shut off current automatically, restore 105%~150%
Voltage Protection Over: voltage 105%~150%
Output Coefficient Temperature: +/-0.03%/ degrees C (0~50 degrees C)
Setup, Rise, up time Hold: 200ms, 100ms, 30ms
Voltage Withstand: and output internal input: and enclosure 1.5KVAC: output, and enclosure Input: 0.5KVAC
Temperature and Humidity Working: -10 degrees C~+60 degrees C, 20%~90%RH
Temperature and Humidity Store: -20 degrees C~+85
degrees C, 10%~95%RH
Weight: 0.3kg
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
in this video we're gonna talk about how to create a 12-volt DC power supply from a 220 volt AC power source so the first component that we need is called a transformer specifically a step-down transformer with a term a show of in this example approximately sixteen point nine to one what this transformer will do is it's going to take a 220 volt AC signal or AC power source and convert it to a 13 volt AC power source this is the primary voltage on the left on the right is the secondary voltage the ratio between a primary voltage of the transformer and its secondary voltage is equal to the ratio of the primary turns to the secondary turns so the number of coils of wire on the left side is sixteen point nine times greater than the number of coils of wire on the right side so with this particular transformer we can get an output of 13 volts AC or alternating current now the next component t


Similar products
