3M (9.5') Home Gym Power® Extension Cable For Schwinn AC Adapters

this video reviews the Schwinn empower as to console RPM and power sensor installation install tip before beginning the calibration process magnet gap on the brake mechanism needs to be verified use the calibration tool and ensure it fits snugly between the magnets magnet gap the overall magnet cap should be no larger than 11 millimeters or inconsistent power readings may occur step one our sensor wire has different lengths of unsealed wires at each end the end with a shorter length of unsealed wires plugs into the console step one a remove the handlebar post and route the end with a longer length of unsealed wires through the post feed the cable through with one section of coil being inside the handlebar tube and one section of coil outside step 2 connect the wire saddle clamp to the underside of the handlebar assembly and route the console to power sensor wire through step 3 reconnect