Ancable 10-Pack TS Mono Male Plug 1/8" 3.5mm Solder Type DIY Audio Cable Connector

do you have a DIY project or repair that you need to make our 3.5 millimeter stereo connector will provide an inexpensive solution for creating a dual channel audio cable a stereo connector can be identified by the two black plastic bands near the tip of the cable 3.5 millimeter refers to the diameter of the plug it is the most common sized plug for small electronic devices such as headphones this connector contains an all metal plug and soldering points the plastic shell and strain relief protect the solder points on the connector to install the connector you will need a soldering iron solder a wire stripper and the cable since this is a stereo connector our cable will need two conductors and a shield unscrew the strain relief and slide it onto the audio cable using a cable stripper strip back the cable jacket then twist the shield together cut off any additional filler material strip