Description
How to use it: 1.Install the appropriate plug according to the size of the pipe diameter, 2.Pump up the hand pump about 10-20 times, until could not pump into the air to get high pressure gas, 3.Block pipe outlet, have it sealed; Pull the trigger to release the high pressure gas.(you could have it repeated till dredge the pipeline.) Package List: 1 x Drain Blaster 4 x adaptors If you found that the product pressure does not increase, please following the instructions to operate: 1. Please check that the sealing ring and gas storage cap (as shown in the picture) are installed correctly. There is a small cover used to block and store air pressure, without this cover, it does not build up pressure when pumping all the air from the handle. 2. The sealing rubber ring is affected by uncertain weather, and may be affected by thermal expansion and contraction when the ambient temperature is relatively low, resulting in a certain preheating expansion time, you must press the handle more times. 3. The upper and lower sections are not completely tight. Press it again and try again. 4. The valve core is loosened and must be pressed firmly to tighten. 5. The screws that loosened during transport will affect the pressure reserve and make a noise. Please tighten the screws.
Aozzy Powerful Toilet Plunger Manual Air Drain Blaster High Pressure Drain Plunger Toilet Unclog Cleaning Tool Kit (White)
Current Price
$25.99
Average
$25.99
Min Price
$25.99
Max Price
$25.99
Price dynamics
0%
Description
How to use it: 1.Install the appropriate plug according to the size of the pipe diameter, 2.Pump up the hand pump about 10-20 times, until could not pump into the air to get high pressure gas, 3.Block pipe outlet, have it sealed; Pull the trigger to release the high pressure gas.(you could have it repeated till dredge the pipeline.) Package List: 1 x Drain Blaster 4 x adaptors If you found that the product pressure does not increase, please following the instructions to operate: 1. Please check that the sealing ring and gas storage cap (as shown in the picture) are installed correctly. There is a small cover used to block and store air pressure, without this cover, it does not build up pressure when pumping all the air from the handle. 2. The sealing rubber ring is affected by uncertain weather, and may be affected by thermal expansion and contraction when the ambient temperature is relatively low, resulting in a certain preheating expansion time, you must press the handle more times. 3. The upper and lower sections are not completely tight. Press it again and try again. 4. The valve core is loosened and must be pressed firmly to tighten. 5. The screws that loosened during transport will affect the pressure reserve and make a noise. Please tighten the screws.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
