Description
BRAND NEWAUDIOPIPE APCLE-15001D1500 Watts Peak Power 1-Channel Monoblock Class D 1-Ohm Stable Stereo Car Audio AmplifierKey Features: 1500 Watts Max PowerRMS Power Rating: - 4 ohms: 600 watts x 1 channels - 2 ohms: 950 watts x 1 channels - 1 ohms: 1500 watts x 1 channelPulse Width Modulated MOSFET Power supplyDouble side FR-4 PCB with high quality SMD componentsOversized toroids for excellent current and voltage control3-Way Protection circuit senses internal temperature and automatically lowers input level to prevent heat damage. Short circuit protection prevent damage when speaker leads are shorted. Overload protection prevent damage from low impedance or blown woofers.1-ohm stableAmplifier is strap-able so that you can connect and bridge with another for additional power output (2 ohm - 4 ohm load only)Variable Low Pass filters allow you to adjust the playback frequencies from 40Hz to 180Hz at 12dB per octave2 channel RCA inputs accepts up to 5 volt input signals0° and 180° phase controlVariable Bass boost controls: 0 - +12dB at 30Hz - 80HzVariable subsonic filter: 24dB 10Hz - 15HzGold plated terminals for all connectionsAccepts up to 16 volts DC input for maximum sound outputFrequency Response: 8Hz to 180 HzTotal Harmonic Distortion (4 Ω): < 0.15% (1kHz)Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz): >70dBDimensions: 14-1/16" (W) x 2-1/8" (H) x 7" (D)Minimum 2 Gauge power wire with 100 amp fuseWeight: 10.5lbs
Audiopipe APCLE-15001D 1500W Class D 1 Ohm Car Audio Mono Amplifier + Wiring Kit
Price is below average
Current Price
$162.99
Average
$173.88
Min Price
$162.49
Max Price
$199.99
Price dynamics
6%
Description
BRAND NEWAUDIOPIPE APCLE-15001D1500 Watts Peak Power 1-Channel Monoblock Class D 1-Ohm Stable Stereo Car Audio AmplifierKey Features: 1500 Watts Max PowerRMS Power Rating: - 4 ohms: 600 watts x 1 channels - 2 ohms: 950 watts x 1 channels - 1 ohms: 1500 watts x 1 channelPulse Width Modulated MOSFET Power supplyDouble side FR-4 PCB with high quality SMD componentsOversized toroids for excellent current and voltage control3-Way Protection circuit senses internal temperature and automatically lowers input level to prevent heat damage. Short circuit protection prevent damage when speaker leads are shorted. Overload protection prevent damage from low impedance or blown woofers.1-ohm stableAmplifier is strap-able so that you can connect and bridge with another for additional power output (2 ohm - 4 ohm load only)Variable Low Pass filters allow you to adjust the playback frequencies from 40Hz to 180Hz at 12dB per octave2 channel RCA inputs accepts up to 5 volt input signals0° and 180° phase controlVariable Bass boost controls: 0 - +12dB at 30Hz - 80HzVariable subsonic filter: 24dB 10Hz - 15HzGold plated terminals for all connectionsAccepts up to 16 volts DC input for maximum sound outputFrequency Response: 8Hz to 180 HzTotal Harmonic Distortion (4 Ω): < 0.15% (1kHz)Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz): >70dBDimensions: 14-1/16" (W) x 2-1/8" (H) x 7" (D)Minimum 2 Gauge power wire with 100 amp fuseWeight: 10.5lbs
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
DC Audio DC3.5K-A3 5100W RMS 18V-Stable Mono Class D Car Amplifier/Amp+Bass Knob
$999
above average
13%
Lanzar OPTI700X2 Optidrive 2800 Watt 2 Channel Competition Class Mosfet Amplifier
$350
above average
1%
