BeoCreate - HiFiBerry

this is a guide on how to upcycle your vintage Bayeux vox CX 50 loudspeaker it's not too difficult and will take roughly an hour and a half start off by removing the fabric covers and checking for possible damage within the drivers if they are in poor condition then we suggest that you replace them as soon as possible flip the speaker around unscrew the two larger screws and take off the back cover pull out the damping material and set it aside for later use cut the wires connecting the drivers to the back plate remember to cut as close to the ends as possible use a hacksaw or a dremel tool to remove the old speaker connector this is what it should look like pick up the 3d printed puck and the power connector and screw them together apply hot glue to the inside of the puck rim and press firmly against the back cover now is a good time to start heating up your soldering iron take the wir