Lowrance A2004/AP48 MOUNTING BRKT KIT

installing the transducer for your hummingbird site imaging unit is an easy operation you can mount the transducer one of two ways here on the boat's transom or on the trolling motor we'll cover mounting to the boat's transom first determine the best location for the transducer on the transom when selecting a mounting location make sure the left and right sides of the side imaging transducer are free from obstructions which can block the sonar signal the transducer must remain in the water for the control head to maintain the sonar signal your owner's manual will include a transducer mounting template tape the template on the transom of the boat mark the three mounting holes on the transom using a marking pen or by partially drilling the holes as shown using a 5/32 inch drill bit you can then double check the fit of the mounting bracket then drill the holes to a depth of approximately o