Brady HSB-95 0.187" - 0.375" Wire Diameter, 100' Length, Clear BradyMark Hot Stamper Transparent Heat Shrink Tubing

[Music] ensure the proper calibration of the belt speed of the model 17 we're measured the belt speed at the max and main set the belt speed can be calibrated by taking a wire placing it on the belt with the belt speed controller set at 999 the piece of wire should take 7.5 seconds from 0 to 12 inches along the belt once you measure the belt speed at the max setting if it's not 7.5 seconds question- to committed a electrical box and adjust the max trip once you check the belt speed at 999 setting change the setting to 100 again place the wire along the belts and measure the time it takes to get from 0 to 12 inches along the belt it should take 75 seconds once you measure the belt speed at the main setting if the belt speed is not 75 seconds plus or minus 2 within the electrical box and adjust we're using the model 17 you want to calibrate the temperature set the belt speed to 250 and us