Brady THT-147-422-10 1.5" Width x 0.375" Height, B-422 Permanent Polyester, Gloss Finish White Thermal Transfer Printable Label (10000 per Roll)

In order to load labels, go to the Load Supplies option on the home screen and press Load Supply. This will back up the dispensing mechanism so that it’s easier to load. Open the side door. Take your roll of labels with the Smart Cell side down at the 6-o’clock position, and slide the roll all the way to the back of the media spindle. Take the tab of the media, and rotate it counterclockwise so that the Smart Cell locks into the memory cell reader. Then take the liner of the labels to thread through the machine. You want to make sure 12 inches or approximately 6 notches of the liner is hanging over the front cover. This would be enough liner to thread through the Wraptor A6500. You want to make sure that both nip rollers are open. Theses are the rollers with yellow knobs. The nip roller closest to the label roll should be pushed down and then in. There is a pin that is placed in a hole