Calibration Label, ENG, Black/White, PK350

now we're going to calibrate for pressure-sensitive labels you must remove at least four inches of labels from the backing make sure only the backing is underneath the sensor when calibrating move your sensor over at least one inch on the backing make sure that your sensor is over on the backing and not on a label the instructions for calibrating pressure-sensitive tags are on the inside cover but I'm going to talk you through them push feed and Paul's in while turning your printer on Diagnostics should show in the display press feed four times until sensory just shows in the display press pause until transmissive with a voltage reading to the right shows in the display push and hold restart until an asterisk to the right of the voltage reading shows in the display push pause until sensor adjust shows in the display turn the printer off turn your printer on with the printhead block down