Description
Cable for rear view camera connection in Nissan cars with OEM Nissan Audio multimedia system without navigation. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires. Image from the camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu. The device is connected to the 32 pin socket. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported.
Compatibility
EU/US/CA/BR/Asia market Nissan Audio without navigation with 4.2"/5"/7" screen
2011-2017: Almera/Altima/Altima Hybrid/Micra
2011-2018: Cube/Frontier/Note/Note Versa
2011-2019: Juke/Rogue
2012-2019: NV Cargo/NV Passenger/Rogue Select
2014-2018: Pulsar
2014-2019: NV200 Taxi/Teana/Titan/Versa Note/Qashqai
2015-2018: Murano
2015-2019: Navara/NP300 Navara/Sentra/Versa Sedan/X-Trail
2016-2019: Lannia/Tiida
Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported.
Compatibility
EU/US/CA/BR/Asia market Nissan Audio without navigation with 4.2"/5"/7" screen
2011-2017: Almera/Altima/Altima Hybrid/Micra
2011-2018: Cube/Frontier/Note/Note Versa
2011-2019: Juke/Rogue
2012-2019: NV Cargo/NV Passenger/Rogue Select
2014-2018: Pulsar
2014-2019: NV200 Taxi/Teana/Titan/Versa Note/Qashqai
2015-2018: Murano
2015-2019: Navara/NP300 Navara/Sentra/Versa Sedan/X-Trail
2016-2019: Lannia/Tiida
Car Backup Reverse Camera Connection Cable for Nissan Altima Juke Micra Sentra X-Trail Audio System
Current Price
$20
Average
$19.2
Min Price
$11.36
Max Price
$28.41
Price dynamics
4%
Description
Cable for rear view camera connection in Nissan cars with OEM Nissan Audio multimedia system without navigation. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires. Image from the camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu. The device is connected to the 32 pin socket. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported.
Compatibility
EU/US/CA/BR/Asia market Nissan Audio without navigation with 4.2"/5"/7" screen
2011-2017: Almera/Altima/Altima Hybrid/Micra
2011-2018: Cube/Frontier/Note/Note Versa
2011-2019: Juke/Rogue
2012-2019: NV Cargo/NV Passenger/Rogue Select
2014-2018: Pulsar
2014-2019: NV200 Taxi/Teana/Titan/Versa Note/Qashqai
2015-2018: Murano
2015-2019: Navara/NP300 Navara/Sentra/Versa Sedan/X-Trail
2016-2019: Lannia/Tiida
Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported.
Compatibility
EU/US/CA/BR/Asia market Nissan Audio without navigation with 4.2"/5"/7" screen
2011-2017: Almera/Altima/Altima Hybrid/Micra
2011-2018: Cube/Frontier/Note/Note Versa
2011-2019: Juke/Rogue
2012-2019: NV Cargo/NV Passenger/Rogue Select
2014-2018: Pulsar
2014-2019: NV200 Taxi/Teana/Titan/Versa Note/Qashqai
2015-2018: Murano
2015-2019: Navara/NP300 Navara/Sentra/Versa Sedan/X-Trail
2016-2019: Lannia/Tiida
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
