Description
• Size of Adapter Box: Length: 3 25/64" (8.6cm) - Width: 2 1/2" (6.2cm)
• Total Length: 27" (70cm)
• Voltage Input: 12V DC
• Signal-to Noise: 90DB
• Max.Current: 1000MA
• Bluetooth Profiles Supported: HFP, A2DP
• Operating Distance: <10m
• Max.Voltage output: 12V
• D/A Device: 24BIT 192KHZ
• Bluetooth Frequency Response: 2.40GHZ - 2.480GHZ
• Frequency Response: 20HZ - 20KHZ
• Working Temperature: -10℃ - 80℃
• Material: High Quality ABS
• Weight: 260g
• Installation Instruction:
1. Turn off car engine and remove key from ignition, if your radio use a security code,make sure that you have the code before unplugging the radio.
2. Unmount the radio from the dash and find CD port at the back of radio.
3. Plug the Adapter connector to CD port (if your radio has a factory XM receiver connected, remove the receiver and install with Y cable, Y cable is not included in package)
4. Turn on radio and select CDC source on the radio by pressing CD (Disc/model/CDC/AUX) button until "CD-1-1" appear on radio screen. And play music to check left and right sound. And test if can control radio track +/-,Disk +/-.
5. For Auxiliary device such as PSP/MD/MP3/mobile etc,connect it with 3.5 Jack cable. It will start play music.
* Note:
**compatible radio model with:
1168, 1269, 4103,14789909, 14792086, 14792089, 14794008,14794522, 14795137, CQ-EM4570AK, CQ-LM4720A, CQ-TT3070AA, CR-LM4282KA, CR-LM4282KA CD,CQ-XM8950A,GS1F669RXA, GJ6R66DSXF02, PT-2674J
Please make sure there is a CD port at the back of radio.
* The radio should switch on CD mode,so that the adapter could be recognized.
* Work with the following audio sources ( with 3.5mm AUX):
*
* Please Read All Description and Fitment Before Ordering the Product.
* Your satisfaction is our utmost concern. Please contact us to resolve any issue before leaving any neutral
Car Stereo Radio Bluetooth Kit Wireless Music For Mazda 2 3 5 6 323 Miata/MX5 SPD Protege CX7 RX8 Tribute Premacy MPV B-Series Pickup BT-50
Price is below average
Current Price
$42.99
Average
$45.99
Min Price
$42.99
Max Price
$46.99
Price dynamics
7%
Description
• Size of Adapter Box: Length: 3 25/64" (8.6cm) - Width: 2 1/2" (6.2cm)
• Total Length: 27" (70cm)
• Voltage Input: 12V DC
• Signal-to Noise: 90DB
• Max.Current: 1000MA
• Bluetooth Profiles Supported: HFP, A2DP
• Operating Distance: <10m
• Max.Voltage output: 12V
• D/A Device: 24BIT 192KHZ
• Bluetooth Frequency Response: 2.40GHZ - 2.480GHZ
• Frequency Response: 20HZ - 20KHZ
• Working Temperature: -10℃ - 80℃
• Material: High Quality ABS
• Weight: 260g
• Installation Instruction:
1. Turn off car engine and remove key from ignition, if your radio use a security code,make sure that you have the code before unplugging the radio.
2. Unmount the radio from the dash and find CD port at the back of radio.
3. Plug the Adapter connector to CD port (if your radio has a factory XM receiver connected, remove the receiver and install with Y cable, Y cable is not included in package)
4. Turn on radio and select CDC source on the radio by pressing CD (Disc/model/CDC/AUX) button until "CD-1-1" appear on radio screen. And play music to check left and right sound. And test if can control radio track +/-,Disk +/-.
5. For Auxiliary device such as PSP/MD/MP3/mobile etc,connect it with 3.5 Jack cable. It will start play music.
* Note:
**compatible radio model with:
1168, 1269, 4103,14789909, 14792086, 14792089, 14794008,14794522, 14795137, CQ-EM4570AK, CQ-LM4720A, CQ-TT3070AA, CR-LM4282KA, CR-LM4282KA CD,CQ-XM8950A,GS1F669RXA, GJ6R66DSXF02, PT-2674J
Please make sure there is a CD port at the back of radio.
* The radio should switch on CD mode,so that the adapter could be recognized.
* Work with the following audio sources ( with 3.5mm AUX):
*
* Please Read All Description and Fitment Before Ordering the Product.
* Your satisfaction is our utmost concern. Please contact us to resolve any issue before leaving any neutral
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hello everybody today we're doing a video for GTA car kids and we're going to be installing our pure Bluetooth car kit and in 2007 Mazda mx-5 or Mazda Miata so we're going to start off with what tools you'll need you'll need the panel removal tool Phillips screwdriver a ten millimeter socket with an extension and also 8035 for torques in order to these two bolts to come out over here and that's in order to wire the microphone and we're going to show you what comes in a kit so you get an attached like this you get a module that has a harness that connects to the back of the radio there's also a microphone which we're going to wire right here there is an auxiliary cable which we're going to wire into the glove box there's also a charging port here and we're also going to wire the charging cable into the glove box so we're going to show you how to do all these things first off we're going


Similar products
