Description
✿✔✿About us: ✿CHUNKUNA are committed to providing better service to our customers. ✿You can feel the professionalism of our services and make customers happy is our service tenet. Specification: Material: Engineering plastics Pump shank:8mm round shank Transmission medium:oil/water pump Self-priming:9ft Impeller structure:Rubber impeller Fitment:For electric drillOperation instruction : 1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use. 2. Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M). 3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line. 4. It is recommended that the pump is mounted to a surface for security and ease of use. 5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. If not, check that inlet tube is properly mounted to inlet. 6. Do not run dry. If pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on fluid being pumped for lubrication.NOTE: DO NOT run pump in reverse. Package Included: 1 x Drill pump 2 x Hose clamps 2 x Connectors
CHUNKUNA Portable Electric Drill Pump Self Priming Transfer Pump Oil Fluid Water Pump
Current Price
$9.99
Average
$8.49
Min Price
$6.99
Max Price
$9.99
Price dynamics
15%
Description
✿✔✿About us: ✿CHUNKUNA are committed to providing better service to our customers. ✿You can feel the professionalism of our services and make customers happy is our service tenet. Specification: Material: Engineering plastics Pump shank:8mm round shank Transmission medium:oil/water pump Self-priming:9ft Impeller structure:Rubber impeller Fitment:For electric drillOperation instruction : 1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use. 2. Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M). 3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line. 4. It is recommended that the pump is mounted to a surface for security and ease of use. 5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. If not, check that inlet tube is properly mounted to inlet. 6. Do not run dry. If pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on fluid being pumped for lubrication.NOTE: DO NOT run pump in reverse. Package Included: 1 x Drill pump 2 x Hose clamps 2 x Connectors
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
