Description
Tired of having the backup batteries in your Mitsubishi servo drives, PLCs or CNC controls die at the most inopportune time? Wish you could quickly replace the proprietary Lithium battery with readily available Alkaline AA batteries? The BBR-3.6V-201 is designed to replace a Mitsubishi ER17330V 3.6V Lithium Thionyl Chloride backup battery (pictured for reference) commonly used in Mitsubishi servo drives, PLCs and CNC controls. These Mitsubishi devices are often installed in CNC equipment such as Mazak Milling and Turning centers. Features: Operates on readily available standard Alkaline AA batteries (ANSI-15A, IEC-LR6)(Included w/ purchase) Longer time interval between battery replacement. Energizer E91 AA cells (included with this device) are rated for 2800 mAh whereas the stock Lithium Thionyl Chloride is rated at 1600 mAh. Integrated battery state of charge display. Depressing the pushbutton on the regulator board illuminates a green or red LED to indicate that the AA batteries are either good or need to be replaced. Fully enclose battery holder keeps the batteries protected. Plug-and-play - Uses the same connector as the Mitsubishi MR-J2 servo drive and other popular Mitsubishi PLCs and CNC controls. Compatible with the low battery alarm in the MR-J2 servo drive. Reverse leakage protection to prevent charging circuits from damaging the batteries. Compatibility (The Mitsubishi ER17330V 3.6V assembly is also known by the following names): A6BAT MRBAT MR-BAT B9670MC A6BAT-MRBAT MR-J2 MR-J2A MR-J2S
CNCBatteries BBR-3.6V-201 - Mazak/Mitsubishi PLC Servo MR-J2 (3.6 Volts) ER17330 A6BAT / MRBAT Lithium Battery Upgrade to Alkaline AA
Price is below average
Current Price
$27
Average
$27.75
Min Price
$27
Max Price
$28
Price dynamics
3%
Description
Tired of having the backup batteries in your Mitsubishi servo drives, PLCs or CNC controls die at the most inopportune time? Wish you could quickly replace the proprietary Lithium battery with readily available Alkaline AA batteries? The BBR-3.6V-201 is designed to replace a Mitsubishi ER17330V 3.6V Lithium Thionyl Chloride backup battery (pictured for reference) commonly used in Mitsubishi servo drives, PLCs and CNC controls. These Mitsubishi devices are often installed in CNC equipment such as Mazak Milling and Turning centers. Features: Operates on readily available standard Alkaline AA batteries (ANSI-15A, IEC-LR6)(Included w/ purchase) Longer time interval between battery replacement. Energizer E91 AA cells (included with this device) are rated for 2800 mAh whereas the stock Lithium Thionyl Chloride is rated at 1600 mAh. Integrated battery state of charge display. Depressing the pushbutton on the regulator board illuminates a green or red LED to indicate that the AA batteries are either good or need to be replaced. Fully enclose battery holder keeps the batteries protected. Plug-and-play - Uses the same connector as the Mitsubishi MR-J2 servo drive and other popular Mitsubishi PLCs and CNC controls. Compatible with the low battery alarm in the MR-J2 servo drive. Reverse leakage protection to prevent charging circuits from damaging the batteries. Compatibility (The Mitsubishi ER17330V 3.6V assembly is also known by the following names): A6BAT MRBAT MR-BAT B9670MC A6BAT-MRBAT MR-J2 MR-J2A MR-J2S
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
