Description
parameter: Power supply interface: MicroUSB Rated input voltage: 5V Maximum input current: 1A Working environment temperature: -20 ° C ~ 60 ° C Charging working voltage: 4.5V~5.5V Antistatic voltage (HBM): 4000V Air volume: 6 CFM Ozone amount: 60mg/h How to operate : There are four states when you operate the disinfection machine. [0- Dormancy status]: At this time, there is no display on the screen. Press the button to enter [1- Start up status]. Plug in the power cord with the adapter and enter [3-Charging Status]. [1- Start up Status]: The battery voltage (3.2-4.2) will be displayed under normal conditions. If there is no operation, it will automatically turn off after 20 seconds and enter [0- Dormancy status]. If the button is pressed, enter [2-Working Status]. Plug in the power cord with the charger and enter [3-Charging Status]. If the electricity is insufficient, the screen displays Lo, and the buzzer will sound a drip, and automatically turn off after a few seconds, then enter [0- Dormancy status]. [2-Working Status]: At this moment, the fan and ozone generator start to work, and the screen displays the remaining working time in units of “minutes”. When the countdown is over or Long press the button directly, the fan and ozone generator stop, the buzzer emits two drops, and then enters [1- Start up status]. If the electricity is insufficient, the screen displays Lo, the buzzer emits four drops, and then enters [1- Start up status]. [3-Charging status]: Only when the charging cable is pulled out will exit this state and then enter [1- Start up status]. When charging starts, the screen displays CH; The amount of electricity exceeds 75%, the CH starts to flash; When full, the buzzer will make three drops and the screen will display FL.
CPAP Cleaner and Sanitizer, scenstar Portable Mini CPAP Cleaner Disinfector CPAP Air Tubes Clean
Price is below average
Current Price
$45.99
Average
$50.24
Min Price
$45.99
Max Price
$58.99
Price dynamics
8%
Description
parameter: Power supply interface: MicroUSB Rated input voltage: 5V Maximum input current: 1A Working environment temperature: -20 ° C ~ 60 ° C Charging working voltage: 4.5V~5.5V Antistatic voltage (HBM): 4000V Air volume: 6 CFM Ozone amount: 60mg/h How to operate : There are four states when you operate the disinfection machine. [0- Dormancy status]: At this time, there is no display on the screen. Press the button to enter [1- Start up status]. Plug in the power cord with the adapter and enter [3-Charging Status]. [1- Start up Status]: The battery voltage (3.2-4.2) will be displayed under normal conditions. If there is no operation, it will automatically turn off after 20 seconds and enter [0- Dormancy status]. If the button is pressed, enter [2-Working Status]. Plug in the power cord with the charger and enter [3-Charging Status]. If the electricity is insufficient, the screen displays Lo, and the buzzer will sound a drip, and automatically turn off after a few seconds, then enter [0- Dormancy status]. [2-Working Status]: At this moment, the fan and ozone generator start to work, and the screen displays the remaining working time in units of “minutes”. When the countdown is over or Long press the button directly, the fan and ozone generator stop, the buzzer emits two drops, and then enters [1- Start up status]. If the electricity is insufficient, the screen displays Lo, the buzzer emits four drops, and then enters [1- Start up status]. [3-Charging status]: Only when the charging cable is pulled out will exit this state and then enter [1- Start up status]. When charging starts, the screen displays CH; The amount of electricity exceeds 75%, the CH starts to flash; When full, the buzzer will make three drops and the screen will display FL.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
