Description
Monitor 1. Screen:4.3-inch 16: 9
2. Resolution: 480 * 272
3. Power supply: DC 12V-24V
4. Visual range: 96 * 54mm
5. Power consumption: 2W
6. Working temperature: -15°C ~ + 50°C
7. Storage Temperature: -20°C ~ + 70°C
8. Interface: AV video interface, a standard power connector road
9. Black screen when no signal
10.Product Dimensions: 11.5CM * 7.5CM * 0.8CM(Length * width *thick)
Car Camera
1.Image Sensor:7070
2.Video System:PAL/NTSC
3.Resolution:PAL:682 H*504 NSTC: 648 H*488 V
4.Horizontal Resolution:480TVL
5.Electronic Shutter:1s-1/10000s
6.SNR:>48dB
7.Min Illumination:0.01LUX
8.Video Output:1.0Vp-p/ 75Ω
9.View Angle:170°
10.Working Voltage:DC9V-12V±0.5V
11.Waterproof Rate:IP67
Note:
1.Connect the power cord must distinguish between positive and negative (red +, black -)
If you pick the wrong,
cartridge fuse blows immediately. Please replace the same parameters of cartridge fuse.
2.Two main components both are LCD screen,the surface is glass structure,
please note that anti-extrusion.
3.Installation should be solid and reliable,
to prevent the situation of falling when the car is brakeing or running and causing personal and equipment accidents.
4.12v-24V DC contact should be connected to the main power
supply in order to prevent excessive voltage affecting the normal use of the machine.
Kindly remindedthe monitor can be connected to a voltage range between 12-36V,
but camera could only be connected to 12V,if you wiring with voltage over 12V,
the camera may get burnt.Thanks for understanding.
Package Included:
1* Digital Car Rear View Monitor 1* Power Cable 1* Car Rear View Camera
2. Resolution: 480 * 272
3. Power supply: DC 12V-24V
4. Visual range: 96 * 54mm
5. Power consumption: 2W
6. Working temperature: -15°C ~ + 50°C
7. Storage Temperature: -20°C ~ + 70°C
8. Interface: AV video interface, a standard power connector road
9. Black screen when no signal
10.Product Dimensions: 11.5CM * 7.5CM * 0.8CM(Length * width *thick)
Car Camera
1.Image Sensor:7070
2.Video System:PAL/NTSC
3.Resolution:PAL:682 H*504 NSTC: 648 H*488 V
4.Horizontal Resolution:480TVL
5.Electronic Shutter:1s-1/10000s
6.SNR:>48dB
7.Min Illumination:0.01LUX
8.Video Output:1.0Vp-p/ 75Ω
9.View Angle:170°
10.Working Voltage:DC9V-12V±0.5V
11.Waterproof Rate:IP67
Note:
1.Connect the power cord must distinguish between positive and negative (red +, black -)
If you pick the wrong,
cartridge fuse blows immediately. Please replace the same parameters of cartridge fuse.
2.Two main components both are LCD screen,the surface is glass structure,
please note that anti-extrusion.
3.Installation should be solid and reliable,
to prevent the situation of falling when the car is brakeing or running and causing personal and equipment accidents.
4.12v-24V DC contact should be connected to the main power
supply in order to prevent excessive voltage affecting the normal use of the machine.
Kindly remindedthe monitor can be connected to a voltage range between 12-36V,
but camera could only be connected to 12V,if you wiring with voltage over 12V,
the camera may get burnt.Thanks for understanding.
Package Included:
1* Digital Car Rear View Monitor 1* Power Cable 1* Car Rear View Camera
Dicrey Backup Camera Monitor Kit Car Backup Camera for Auto System Rear View/Constantly View for Car/SUV/Vehicle/Pickup Waterproof Night Vision Guide Lines (Round)
Price is below average
Current Price
$14.99
Average
$15.49
Min Price
$14.99
Max Price
$15.99
Price dynamics
3%
Description
Monitor 1. Screen:4.3-inch 16: 9
2. Resolution: 480 * 272
3. Power supply: DC 12V-24V
4. Visual range: 96 * 54mm
5. Power consumption: 2W
6. Working temperature: -15°C ~ + 50°C
7. Storage Temperature: -20°C ~ + 70°C
8. Interface: AV video interface, a standard power connector road
9. Black screen when no signal
10.Product Dimensions: 11.5CM * 7.5CM * 0.8CM(Length * width *thick)
Car Camera
1.Image Sensor:7070
2.Video System:PAL/NTSC
3.Resolution:PAL:682 H*504 NSTC: 648 H*488 V
4.Horizontal Resolution:480TVL
5.Electronic Shutter:1s-1/10000s
6.SNR:>48dB
7.Min Illumination:0.01LUX
8.Video Output:1.0Vp-p/ 75Ω
9.View Angle:170°
10.Working Voltage:DC9V-12V±0.5V
11.Waterproof Rate:IP67
Note:
1.Connect the power cord must distinguish between positive and negative (red +, black -)
If you pick the wrong,
cartridge fuse blows immediately. Please replace the same parameters of cartridge fuse.
2.Two main components both are LCD screen,the surface is glass structure,
please note that anti-extrusion.
3.Installation should be solid and reliable,
to prevent the situation of falling when the car is brakeing or running and causing personal and equipment accidents.
4.12v-24V DC contact should be connected to the main power
supply in order to prevent excessive voltage affecting the normal use of the machine.
Kindly remindedthe monitor can be connected to a voltage range between 12-36V,
but camera could only be connected to 12V,if you wiring with voltage over 12V,
the camera may get burnt.Thanks for understanding.
Package Included:
1* Digital Car Rear View Monitor 1* Power Cable 1* Car Rear View Camera
2. Resolution: 480 * 272
3. Power supply: DC 12V-24V
4. Visual range: 96 * 54mm
5. Power consumption: 2W
6. Working temperature: -15°C ~ + 50°C
7. Storage Temperature: -20°C ~ + 70°C
8. Interface: AV video interface, a standard power connector road
9. Black screen when no signal
10.Product Dimensions: 11.5CM * 7.5CM * 0.8CM(Length * width *thick)
Car Camera
1.Image Sensor:7070
2.Video System:PAL/NTSC
3.Resolution:PAL:682 H*504 NSTC: 648 H*488 V
4.Horizontal Resolution:480TVL
5.Electronic Shutter:1s-1/10000s
6.SNR:>48dB
7.Min Illumination:0.01LUX
8.Video Output:1.0Vp-p/ 75Ω
9.View Angle:170°
10.Working Voltage:DC9V-12V±0.5V
11.Waterproof Rate:IP67
Note:
1.Connect the power cord must distinguish between positive and negative (red +, black -)
If you pick the wrong,
cartridge fuse blows immediately. Please replace the same parameters of cartridge fuse.
2.Two main components both are LCD screen,the surface is glass structure,
please note that anti-extrusion.
3.Installation should be solid and reliable,
to prevent the situation of falling when the car is brakeing or running and causing personal and equipment accidents.
4.12v-24V DC contact should be connected to the main power
supply in order to prevent excessive voltage affecting the normal use of the machine.
Kindly remindedthe monitor can be connected to a voltage range between 12-36V,
but camera could only be connected to 12V,if you wiring with voltage over 12V,
the camera may get burnt.Thanks for understanding.
Package Included:
1* Digital Car Rear View Monitor 1* Power Cable 1* Car Rear View Camera
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hi welcome to Amster recently I got this bosque mk1 this is a car backup camera it's wireless so it's very similar to the first one ever reviewed except that this one's higher quality now this costs roughly $100 little over 100 off Amazon here's all here's the box there's nothing pretty else on the box no specs nothing like that here's the user manual 51 reading part of it in more detail it just feel free to pause the video and for my vehicle the only tools I need is a flat screwdriver and a Phillips screwdriver electrical tape could be helpful or some of the technical specs for it there's the back-up camera information transmitter information so like for example if I had a trailer that case I would definitely want to set this up alright we have the wiretap also some zip ties here there are two wiretaps four zip ties this is the power unit for the monitor and it also has an additional U


