- HomeElectronicsCar & Vehicle ElectronicsVehicle Electronics AccessoriesVehicle Audio & Video InstallationAmplifier InstallationAmplifier Wiring Kits
Here are some useful tips that are good know:
1. AVOID HOT SURFACES
- Don't stick a LED strip directly on a hot surface - like the engine and the exhaust - the heat will melt it.
2. PICK A UNIFIED, CLEAN AND DRY SURFACE
- To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.
- Consider to use surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.
3. APPLY PRESSURE AT LEAST 3 SECONDS
- Firm application pressure develops better adhesive contact and helps improve bond strength.
4. WAIT FOR OPTIMUM ADHESION
- The bond strength will increase as the adhesive flows onto the surface.
- Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours.
5. CONTACT DITRIO IF COLORS ARE WRONG
- There are 4 pins inside a fast locking connector, and 3 of them are for managing colors
- There is no a universal standard for the sequence for these 4 pins, and each maker makes it their way
- If you have a kit from another brand and you see colors are wrong after adding our individual strips, probably the pins' sequence is different
- In this case, please contact DITRIO and we will make it right for you.
Last but not least, if you have some great ideas, feel free to try and we will always give you support!
Make your bike the most amazing!
DITRIO 2pcs 36 Inches Underglow LED Strip Light Kit with SMD RGB 5050 for Motorcycles Trikes Trailers ATVs and UTVs, SPT-36IN
Here are some useful tips that are good know:
1. AVOID HOT SURFACES
- Don't stick a LED strip directly on a hot surface - like the engine and the exhaust - the heat will melt it.
2. PICK A UNIFIED, CLEAN AND DRY SURFACE
- To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.
- Consider to use surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.
3. APPLY PRESSURE AT LEAST 3 SECONDS
- Firm application pressure develops better adhesive contact and helps improve bond strength.
4. WAIT FOR OPTIMUM ADHESION
- The bond strength will increase as the adhesive flows onto the surface.
- Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours.
5. CONTACT DITRIO IF COLORS ARE WRONG
- There are 4 pins inside a fast locking connector, and 3 of them are for managing colors
- There is no a universal standard for the sequence for these 4 pins, and each maker makes it their way
- If you have a kit from another brand and you see colors are wrong after adding our individual strips, probably the pins' sequence is different
- In this case, please contact DITRIO and we will make it right for you.
Last but not least, if you have some great ideas, feel free to try and we will always give you support!
Make your bike the most amazing!
in next 2 weeks
