Description
Product Instructions： ★1, Installation:Unscrew the shower head from the shower hose, then place the filter gasket and hand-screw the enema tube. The installation is complete. Installed back to the original shower head after use。（Installation of the enema tube display: please see the product picture, there are installation steps in the product picture） ★2, adjust the water temperature: the most suitable water temperature between 40-43 degrees, the water temperature is low or high will cause discomfort, low will cause abdominal pain, high will be scalded, please adjust to feel appropriate, and then lavage. ★3, adjust the water flow: flow adjustment method to the outlet to the spray height of 9.8-11.8 inches is better, the water is too small will feel difficult to insert dry, unable to plug; water too fast, too strong momentum will have discomfort, Please adjust to feel comfortable and then use. ★4, when used to plug into the body: it is recommended to use squat slowly inserted into the body, warm water into the body will have a certain amount of bowel movements, relax the anus can naturally discharge dirt from the anus, while water, while the discharge In vitro, pumping inserted resistance encountered resistance can also be rotated to adjust the angle of the tube, the more inserted and inserted a few times more can be inserted deeper into the depth of the proposed 19-39inches, no discharge of contaminants and then exit the enema, cleaning is completed, Wait a moment after the cleaning is complete, about 5 minutes per lavage time,it is recommended not more than three times a week lavage irrigation, lavage operation, if discomfort, immediately out enema, try again. ★5, Matters needing attention: When warm water can keep flowing, it can freely pump back and forth without using lubricating fluid. ★If you have any questions or are not satisfied with the product, please contact us in time, thank you for your support.
