Extra Longlife Windsock 18"x96"

one of the most frequent questions that were asked at wind tech is what will I use to mount my wind sock so we need to pull and since the wind sock bearing is basically a piece of half inch stainless water pipe that we've added bearings to a piece of water pipe is the simplest answer this can be bought at any hardware store local and you know you could there's a variety of sizes and so I would suggest 1/2 or 3/4 inch for our smaller frames 1/2 inch piece of galvanized water pipe with a coupler screwed on to the top and the windsock screwed into that and you have yourself a pole now it's also important to make sure that this is mounted plumb so that the windsock will turn in all 360 degrees of rotation as though it pushes it if you need a little more strength than the half-inch then I would suggest a 3/4 inch with a coupler and are reducing bushing so the reduce reducing bushing goes in