Generic 5 Pieces Flex Ribbon Cable Replacement for DJI Phantom 2 Vision Plus Gimbal Camera Connector P2V+

BeeZee hi this is will here with drones made easy this is going to be a video about how to swap out a ribbon or flex cable on your phantom 3 camera gimbal and for this repair you are going to need a double-0 phillips t6 torque driver q-tip or cotton swab tweezers and snippers first you're going to take the snippers and remove the discs off of your anti drop pins then you're going to remove the camera gimbal from the rubber dampers carefully remove the wires from the bottom of the camera gimbal use the double zero Phillips and remove the four screws from the base of the camera gimbal during this entire repair make sure you keep your hardware very organized it will help you as you reassemble the camera gimbal remove the base covers carefully open the switches on the gimbal mainboard to release the flex cable use the t6 torque driver to remove the hardware from the back of the camera and a