Ghent 3" x 4" Aluminum Radial Edge Euro-Style Frame Natural Cork Bulletin Board, Made in the USA

the first step to installing Cork skins is to determine and measure the area you will be covering the surface should be clean and smooth for best results because cork is not dimensionally stable your cork panels will be cut slightly oversized to be trimmed on location to trim your board for your specific application use a utility knife and a straight edge you will need to determine if you will have vertical or horizontal seams this will depend on the surface you will be covering and general preferences for vertical joints establish a plumb line at the location for your first seam for horizontal joints mark a level line for your seam remove the adhesive covering from the cork skin apply your first cork skin matching the edge of your plumb or level line using a helper if needed to hold the adjacent side of the skin away from the wall until you are ready to apply the skin roll the entire s