Performance Plus SCB12 Speaker Cable Adapter for Dual Banana to 1/4" Phone 12" Long

replacing a dual banana plug to replace a dual banana plug on your push button touch pad start jumper speaker speaker jumper or relay judging platform jumper you will need a pair of wire strippers small screwdriver waterproof adhesive and your tpmd the first thing you will do is cut the old dual banana plug off strip the outer cover one inch back from the end remove the paper or fiber filler then strip off the outer cover of the black and white wires one quarter inch from the end twist the wire so it will slide into the termination posts slide both wires through the guide be sure to push the casing through the guide as an extra strain relief using a screwdriver that will not scratch the sides of the pods loosen the set screws the set screws can be loosened to a point that they can fall out be careful to cover the holes so the set screws are not lost slide the twisted metal of the black