Description
Specifications:
Display type:digital
Baby for:All conform to the second generation of vehicle automatic diagnosis system (OBD II) model
Product Size:150*85*14mm Environment temperature:~40c+80cAtmospheric pressure86-106kpa
Alarm sound level:>>=30db
Working voltage:9v~16vdc(12vdc/70mA)
Display project:Speed/engine speed/instantaneous fuel consumption/engine temperature/battery voltage
Speed display:Projection display car speed; The safest way to avoid lower the head to watch Engine speed:Show car engine speed state Instant oil
consumption:Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip:In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Battery voltage:When the battery voltage is lower than/when to 12 v, warning will light up to remind
Engine temperature:Water temperature reached 115 degrees automatically alarm and light up
Shift hint:When the engine speed and speed reaches a certain scale,tips to save fuel consumption increase gear
Km unit:The international system of units, the general use kilometers per hour, with km/h
Buzzer mark:According to the switch can be opened and closed buzzer sound
Methods of pasting the film:
A . equably water the place that the film will be pasted on
B . rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around .
Package Content:
1 x Host machine of HUD
1 x Reflecting film
1 x OBD II connecting line
1 x Non-slip mat
Display type:digital
Baby for:All conform to the second generation of vehicle automatic diagnosis system (OBD II) model
Product Size:150*85*14mm Environment temperature:~40c+80cAtmospheric pressure86-106kpa
Alarm sound level:>>=30db
Working voltage:9v~16vdc(12vdc/70mA)
Display project:Speed/engine speed/instantaneous fuel consumption/engine temperature/battery voltage
Speed display:Projection display car speed; The safest way to avoid lower the head to watch Engine speed:Show car engine speed state Instant oil
consumption:Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip:In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Battery voltage:When the battery voltage is lower than/when to 12 v, warning will light up to remind
Engine temperature:Water temperature reached 115 degrees automatically alarm and light up
Shift hint:When the engine speed and speed reaches a certain scale,tips to save fuel consumption increase gear
Km unit:The international system of units, the general use kilometers per hour, with km/h
Buzzer mark:According to the switch can be opened and closed buzzer sound
Methods of pasting the film:
A . equably water the place that the film will be pasted on
B . rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around .
Package Content:
1 x Host machine of HUD
1 x Reflecting film
1 x OBD II connecting line
1 x Non-slip mat
Heads Up Display LESHP HUD Display W02 with OBD2 Interface Plug Speeding (MPH/KMH) Fuel Consumption Indicator Projected Driving Mileage Warning
Current Price
$29
Average
$29
Min Price
$29
Max Price
$29
Description
Specifications:
Display type:digital
Baby for:All conform to the second generation of vehicle automatic diagnosis system (OBD II) model
Product Size:150*85*14mm Environment temperature:~40c+80cAtmospheric pressure86-106kpa
Alarm sound level:>>=30db
Working voltage:9v~16vdc(12vdc/70mA)
Display project:Speed/engine speed/instantaneous fuel consumption/engine temperature/battery voltage
Speed display:Projection display car speed; The safest way to avoid lower the head to watch Engine speed:Show car engine speed state Instant oil
consumption:Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip:In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Battery voltage:When the battery voltage is lower than/when to 12 v, warning will light up to remind
Engine temperature:Water temperature reached 115 degrees automatically alarm and light up
Shift hint:When the engine speed and speed reaches a certain scale,tips to save fuel consumption increase gear
Km unit:The international system of units, the general use kilometers per hour, with km/h
Buzzer mark:According to the switch can be opened and closed buzzer sound
Methods of pasting the film:
A . equably water the place that the film will be pasted on
B . rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around .
Package Content:
1 x Host machine of HUD
1 x Reflecting film
1 x OBD II connecting line
1 x Non-slip mat
Display type:digital
Baby for:All conform to the second generation of vehicle automatic diagnosis system (OBD II) model
Product Size:150*85*14mm Environment temperature:~40c+80cAtmospheric pressure86-106kpa
Alarm sound level:>>=30db
Working voltage:9v~16vdc(12vdc/70mA)
Display project:Speed/engine speed/instantaneous fuel consumption/engine temperature/battery voltage
Speed display:Projection display car speed; The safest way to avoid lower the head to watch Engine speed:Show car engine speed state Instant oil
consumption:Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip:In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Battery voltage:When the battery voltage is lower than/when to 12 v, warning will light up to remind
Engine temperature:Water temperature reached 115 degrees automatically alarm and light up
Shift hint:When the engine speed and speed reaches a certain scale,tips to save fuel consumption increase gear
Km unit:The international system of units, the general use kilometers per hour, with km/h
Buzzer mark:According to the switch can be opened and closed buzzer sound
Methods of pasting the film:
A . equably water the place that the film will be pasted on
B . rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around .
Package Content:
1 x Host machine of HUD
1 x Reflecting film
1 x OBD II connecting line
1 x Non-slip mat
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hi this dr. class here and in this video I'll be unboxing and installing this head-up display unit that I got off a website called gearbest.com it cost just under fifty dollars and this unit what it does is that it will project the data it collects from the obd2 diagnostic port onto your windshield let me open this up and show you what's inside here we have the 5.5 inch LED display unit it's very low profile here's the back here is the obd2 cable that connects the obd2 port on your vehicle to the display unit here is the user manual here we have an anti-slip pad for the display unit sit on the back here is the reflective windshield screen let's not very closer look at the unit now the model number on this head-up display unit is simply called the 88 and I will put the product link in the description below now this unit does have an auto illumination so what that means is that during the


Similar products
