Description
Preserving The Integrity Of Stone, Tile & Pavers. Important: Clean surface thoroughly before treatment using HMK R155 Intensive Cleaner (diluted) followed by a flood rinse with water and allow at least 24 hours to dry (max residual moisture of 2-4%) before sealing. If under floor heating exists, switch it off and allow the surface to cool to room temperature. Instructions: Apply HMK S242 generously and evenly to a chemically clean and dry surface with a natural bristle paint brush or the HMK Z950-HMK Z951 brushes. One saturating, wet-on-wet application is usually sufficient depending on porosity of the stone. Thoroughly remove excess before drying on the surface. For more absorbent surfaces additional applications may be required. Subsequent applications may be done within fifteen minutes of the initial application, but it is best to wait 24 hours between applications to best determine saturation level. Smears or imperfections left after the application process can be removed using a soft clean cloth moistened with HMK S242 and buffing. Do not walk on the treated surface until 4 to 6 hours after treatment is completed. Resistance to dirt and water is developed over 24 hours. Protect surface from rain and humidity for 12 hours. Do not apply to rubber, plastics, lacquered or varnished surfaces and solvent intolerant materi
HMK S242 Enhancing Impregnator Reduces Penetration of Water and Dirt on Polished, honed and Textured finishes. Enhances Color. Solvent Based. for Interior and Exterior use. Preserving. HMKS242
Current Price
$49.99
Average
$49.99
Min Price
$49.99
Max Price
$49.99
Description
Preserving The Integrity Of Stone, Tile & Pavers. Important: Clean surface thoroughly before treatment using HMK R155 Intensive Cleaner (diluted) followed by a flood rinse with water and allow at least 24 hours to dry (max residual moisture of 2-4%) before sealing. If under floor heating exists, switch it off and allow the surface to cool to room temperature. Instructions: Apply HMK S242 generously and evenly to a chemically clean and dry surface with a natural bristle paint brush or the HMK Z950-HMK Z951 brushes. One saturating, wet-on-wet application is usually sufficient depending on porosity of the stone. Thoroughly remove excess before drying on the surface. For more absorbent surfaces additional applications may be required. Subsequent applications may be done within fifteen minutes of the initial application, but it is best to wait 24 hours between applications to best determine saturation level. Smears or imperfections left after the application process can be removed using a soft clean cloth moistened with HMK S242 and buffing. Do not walk on the treated surface until 4 to 6 hours after treatment is completed. Resistance to dirt and water is developed over 24 hours. Protect surface from rain and humidity for 12 hours. Do not apply to rubber, plastics, lacquered or varnished surfaces and solvent intolerant materi
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
