ipad case For iPad Air 1st Generation model MD788CH/A MD789CH/A MD790CH/A ME906CH/A MD785LL/A MD786LL/A MD787LL/A MD898LL/A MD788LL/A MD789LL/A MD790LL/A ME906LL/A MD788LL/A Black Black

welcome to the iPad air take apart guide to remove the glass digitizer you will need to apply some heat around the edge of the display applying heat loosens the adhesive next use a suction cup to carefully lift up on the glass and then use a very thin guitar pick to slide underneath the edge of the glass use the pick to cut the adhesive underneath the glass do this around the entire display once the adhesive has been cut around the entire display the glass digitizer will lift up like this remove the black anti-static tape covering the two screws on the top of the LCD remove the four Phillips screws around the LCD and then lift the LCD up like this next remove the Phillips screw holding the logic board down to the battery and then slide a pic between the logic board and the battery to release the contact next remove the Phillips screws from the EMI shield covering the display connectors