Description
Doosl 3.5mm Plug In ear Hi-fi Music Headphones
Parameter:
Model: DSIT018
Type: In-ear
Impedance: 16Ω
Frequency Range: 10-24000Hz
Sensitivity: 98dB/mW
Wired/Wireless: Wired
Plug Diameter: 3.5mm
Plug Type: L-type plug with gold plating
Cable Length: 1.2m
Cable Material : High-purity oxygen-free copper wire
Driver Unit: 9.0mm rare earth permanent magnet moving coil
Accessories:
Carrying case * 1
Silicone Earbuds * 3 (L/M/S)
Cleaning cloth * 1
User manual * 1
Warranty Card * 1
Tips:
1. "Burning in" a pair of new headphones refers to the process of playing a constant, relatively loud audio signal through them for a certain period of time before using them normally.
2. This procedure is meant to improve the headphone's sound by loosening their internal elements and make your new headphones sound better.
3. Burn-in is a gradual process. At the begining, start playing some soft music through the headphones and set the music to repeat infinitely. Turn the volume to a low level and let the music play through the headphones for 10-30 hours. Then, play some music and turn the volume to a moderately loud level - the volume should not be so loud that it's uncomfortable to listen to through the headpones. This process will last for 100-200 hours.
4. Please take care of your headhones during the burn-in. Let the headphones take a ten minutes' break every two hours and turn the volume to a proper level-not too loud.
5. Lossless music is recommended during headphone burn-in, such as music with the format APE, FLAC or WAV.
Parameter:
Model: DSIT018
Type: In-ear
Impedance: 16Ω
Frequency Range: 10-24000Hz
Sensitivity: 98dB/mW
Wired/Wireless: Wired
Plug Diameter: 3.5mm
Plug Type: L-type plug with gold plating
Cable Length: 1.2m
Cable Material : High-purity oxygen-free copper wire
Driver Unit: 9.0mm rare earth permanent magnet moving coil
Accessories:
Carrying case * 1
Silicone Earbuds * 3 (L/M/S)
Cleaning cloth * 1
User manual * 1
Warranty Card * 1
Tips:
1. "Burning in" a pair of new headphones refers to the process of playing a constant, relatively loud audio signal through them for a certain period of time before using them normally.
2. This procedure is meant to improve the headphone's sound by loosening their internal elements and make your new headphones sound better.
3. Burn-in is a gradual process. At the begining, start playing some soft music through the headphones and set the music to repeat infinitely. Turn the volume to a low level and let the music play through the headphones for 10-30 hours. Then, play some music and turn the volume to a moderately loud level - the volume should not be so loud that it's uncomfortable to listen to through the headpones. This process will last for 100-200 hours.
4. Please take care of your headhones during the burn-in. Let the headphones take a ten minutes' break every two hours and turn the volume to a proper level-not too loud.
5. Lossless music is recommended during headphone burn-in, such as music with the format APE, FLAC or WAV.
doosl in Ear Headphones Sports Earbuds Noise Isolating Hi-fi Earphones All Smartphones - Blue (Blue)
Price is below average
Current Price
$17.47
Average
$23.21
Min Price
$14.99
Max Price
$32.95
Price dynamics
25%
Description
Doosl 3.5mm Plug In ear Hi-fi Music Headphones
Parameter:
Model: DSIT018
Type: In-ear
Impedance: 16Ω
Frequency Range: 10-24000Hz
Sensitivity: 98dB/mW
Wired/Wireless: Wired
Plug Diameter: 3.5mm
Plug Type: L-type plug with gold plating
Cable Length: 1.2m
Cable Material : High-purity oxygen-free copper wire
Driver Unit: 9.0mm rare earth permanent magnet moving coil
Accessories:
Carrying case * 1
Silicone Earbuds * 3 (L/M/S)
Cleaning cloth * 1
User manual * 1
Warranty Card * 1
Tips:
1. "Burning in" a pair of new headphones refers to the process of playing a constant, relatively loud audio signal through them for a certain period of time before using them normally.
2. This procedure is meant to improve the headphone's sound by loosening their internal elements and make your new headphones sound better.
3. Burn-in is a gradual process. At the begining, start playing some soft music through the headphones and set the music to repeat infinitely. Turn the volume to a low level and let the music play through the headphones for 10-30 hours. Then, play some music and turn the volume to a moderately loud level - the volume should not be so loud that it's uncomfortable to listen to through the headpones. This process will last for 100-200 hours.
4. Please take care of your headhones during the burn-in. Let the headphones take a ten minutes' break every two hours and turn the volume to a proper level-not too loud.
5. Lossless music is recommended during headphone burn-in, such as music with the format APE, FLAC or WAV.
Parameter:
Model: DSIT018
Type: In-ear
Impedance: 16Ω
Frequency Range: 10-24000Hz
Sensitivity: 98dB/mW
Wired/Wireless: Wired
Plug Diameter: 3.5mm
Plug Type: L-type plug with gold plating
Cable Length: 1.2m
Cable Material : High-purity oxygen-free copper wire
Driver Unit: 9.0mm rare earth permanent magnet moving coil
Accessories:
Carrying case * 1
Silicone Earbuds * 3 (L/M/S)
Cleaning cloth * 1
User manual * 1
Warranty Card * 1
Tips:
1. "Burning in" a pair of new headphones refers to the process of playing a constant, relatively loud audio signal through them for a certain period of time before using them normally.
2. This procedure is meant to improve the headphone's sound by loosening their internal elements and make your new headphones sound better.
3. Burn-in is a gradual process. At the begining, start playing some soft music through the headphones and set the music to repeat infinitely. Turn the volume to a low level and let the music play through the headphones for 10-30 hours. Then, play some music and turn the volume to a moderately loud level - the volume should not be so loud that it's uncomfortable to listen to through the headpones. This process will last for 100-200 hours.
4. Please take care of your headhones during the burn-in. Let the headphones take a ten minutes' break every two hours and turn the volume to a proper level-not too loud.
5. Lossless music is recommended during headphone burn-in, such as music with the format APE, FLAC or WAV.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
got a review over the dust cell ds0 1/8 headphones as you can see the box itself is pretty nice beautiful beautiful take a good look this is what you're gonna get these are gorgeous and I must say very affordable and if you open up here's what you have beautiful package and of course Wow look at that kind of remind me of diamonds when you look at it you just have the look of a diamond beautiful and of course you're also great with this different style different sizes so you can always change it to earbuds of course it's encased in ones that you just come do it on one on it is a little too big or a little too small you can always change it up to a different size now let's take a look at the product itself here's will be having the box you have what a nice little leather carrying case of course very nice added bonus have a little card in here yeah but this is the main important they'll be


Similar products