K&K PRO Power Cable for Trimble R8 R7 4700 etc GPS wire to Alligator clips

this short video will show you how to use Trimble GPS configurator to configure a RS series receiver to do data logging at powerup when you launch Trimble GPS configurator you need to choose the correct receiver type comport and click connect to connect to the receiver once connected to the receiver under the log data tab you will need to now select start logging once you click start logging the measurement interval is how often the receiver will log data I'm going to have this receiver set up to log every 5 seconds the positional ennoble update will be set to 5 minute which is more than adequate I'll set the correct elevation mask and choose to choose start logging up powerup this is what enables the receiver to start logging data each time the receiver is turned on and off every time this receivers turn on and off a separate t02 file will be created automatically click OK to save your