Tweco, 95101101, Female Terminal, Copper

when using a shear bolt connector strip the insulation according to the table in your shear bolt connector installation instructions using a wire brush thoroughly clean the bare surface strands of each conductor end determine whether the insert in the connector should be removed according to the table in the connector installation instructions if insert removal is required use a small screwdriver to lift or tap the insert from the connector body do not remove the inhibitor contained inside the connector back out the bolds enough to give clearance for the conductor in the connector body note do not completely remove bolts from the connector body removing bolts followed by improper bolt reinstallation could result in stripping of the threads insert cable conductor until it butts up with the end of the connector hand tighten the shear bolts so that the connector stays in place alternately