Emblem WITH Backup Reverse Camera ( Full Color Camera)

COLOR: Chrome

For use with( Years):
Ford Flex (2009-2012)*
*Note- Prior to ordering, measure your current emblem. This replaces all Ford large oval emblems located at the center of the tailgate.

Installation:
This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. Typically the factory emblem is attached to your truck with double sided tape. Use a heat gun, at a low heat setting, and use a piece of floss between the emblem and tailgate to remove the old emblem. On some older models, you may need to drill a small hole in your tailgate to run the wiring through. Most 2006+ models come with the holes already drilled.

Description:

This is an Genuine Ford Emblem (part #CL3Z-9942528-B), aftermarket Chrome base, and  backup camera. For the power supply, you can connect it to any 12V power source. Includes video and power extension cable, 8 Meters(26 feet).

Camera Specs:
Image sensor : 1/4" OV136 CCD Chip
Signal System : NTSC/PAL
Effective Pixel : NTSC: 728 x 582
Minimum Illumination : 0.5 Lux
Resolution : 600 TV line
Angle : 170 Degree
Waterproof Rate : IP68
Power : DC 12V   
Cable Length : Video Cable 8 Meters

Attention!!!:
-Before purchasing check the back of your Monitor/Screen that you have a Yellow RCA input for easy installation.
-Installation is still possible without the Yellow RCA, however it is much more difficult and will require a professional to splice in the Video In signal.