(md0410) Black Home Button Flex Ribbon Cable with Touch ID Sensor Space Gray Ring Assembly Replacement Part Compatible for Ipad Mini 3 A1599 A1600

welcome to the iPad Mini 3 take up our guide first you will need to use a heat gun around the edges of the glass to heat up the adhesive this will make it easier to take the glass off start heating up the glass along the top edges then use a suction cup and a flat pry tool to separate the glass be careful not to dig in too deep with the pry tool because you could easily scratch the LCD or even crack your glass once the top section is loosened then heat up around the sides and gently pry the side portions of the glass away from the back case now that the top section insides are loosened you can then open the glass up like this be careful not to put too much tension on the flex cables at the bottom when opening the glass next remove the Phillips screws from the LCD there are two screws to have a foam piece covering them that will need to be removed before you can take the screws out befor