RED 12AWG Stranded 600V Hook Up Wire - 25' Roll

today I'm going to be showing you how to properly set up your Hobart handler wire feed welder today we'll be using the handler 140 first thing we're going to do is connect our ground you're going to take the rubber sleeve put it over your cable and the unit comes with your hardware 7/16 bolt and nut and you're going to want to connect those and the real important thing here to remember is to make sure you get a good contact this nut needs to be tightened very tight do not finger tighten this you'll not get a good ground and will not very good weld to connect this ground is ready to go let's hook up the MIG gun installing your MIG gun on the handler is very easy first thing we'll do is take our trigger leads put those through the hole in the front then we'll take the end of our gun take that power pin and shove that right into the drive assembly make sure you get it all the way in nice a