Description

Features:

Pair Rockville RV46.3A 4 x 6" 3-way car speakers. Sensitivity: 90 dB @ 1w/1m. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Cotton spider material. Copper terminals. Cutout diameter: 5.6" x 3.46". Magnet: 5.4 Oz Y25 magnet. Magnet dimensions: 70mm x 10mm. Fs: 134.951 hz. Re: 3.6 OHM. Qes: 2.768. Qts: 1.602. Qms: 3.801. Fits 4" x 6" openings. Top mounting depth: 1.85" 95% of installs use the top mounting depth). Bottom mounting depth: 2" (This measures the speaker from top to bottom)

Rockville R14G50MSW 50 Ft Marine/Boat White Speaker Wire. Color: White. Marine Grade Wire. Engineered to withstand daily harsh marine conditions protected against corrosion and its soft, flexible PVC jacket surrounds excellent signal transfer.Tinned wire has superior corrosion resistance. UL1426 Premium Oxygen Free Copper Boat Cable. Resistant to extreme cold, salt water, battery acid, oil, gasoline and ultra-violet radiation..

Rockville R14G50MSW 50 Ft Marine/Boat White Speaker Wire. Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion. Drawn copper, unidirectional lay for ultimate in sound quality. Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards. Using a propriety blend of pure copper wiring and special winding technique, we were able to reduce the "impedance skin effect" reducing noise while maintaining sound purity with minimal to zero impedance gain.

Rockville R14G50MSW 50 Ft Marine/Boat White Speaker Wire. Installation in the tightest of corners are easily conquered, thanks to our Super-Flex insulation. Rockville marine speakers cables are durable, very flexible and easy to use. The Super-Flex jacket was designed to handle the most extreme conditions.

Overhead Soundbar Rollbar+Front Speaker Upgrade Kit For 87-95 JEEP WRANGLER YJ

Get price

Current Price

$119.99

Average

$119.99

Min Price

$119.99

Max Price

$119.99

Price dynamics

Description

Features:

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

I want to talk about replacing the speakers and in 95 Jeep YJ now there's two pieces of information on this bought speakers from Crutchfield and the instructions there were to remove the three bolts holding the windshield in place and these three bolts holding that metal shield in place I then tell you to bend that metal shield back reach behind take the old speaker out put the new speaker in well that metal shield right there is pretty solid and strong and my concern was if I bent in that would I be able to put it back into the correct position or what I really bend it out of shape the Chilton manual also tells you to reach behind without removing those bolts and remove the speaker and put the new one in its place well my hands are fairly large there's some sure most guys are even and even if you're not a guy doing this it's very difficult to a GN behind there to be able to pull those