Description
The P Audio SN6-600CA is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-600CA is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SN6-600CA has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-600CA features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-600CA utilizes P Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s precision round wire technology to maximize system conversion efficiency. The cone suspension is a high internal damping rubber design. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. SPECIFICATIONS Nominal diameter: 165 mm/6.5 in Power rating: 150 Watts(aes) Nominal impedance: 8 OHMS Sensitivity: 90 dB Frequency range: 80-3000 Hz Chassis type: Cast aluminum Magnet type: Ferrite Magnet weight: 2.6 kg/92.1 oz Voice coil diameter: 44.5 mm/1.75 in Coil material: SV-W Former material: Kapton Cone material: Paper Surround material: Rubber Suspension: Single X-max: 3 mm/0.12 in Gap depth: 6 mm/0.24 in Voice coil winding width: 12 mm/0.47 in Net Weight: 1.8 kg/4.0 lb Packing Dimension WxDxH: 180 x 180 x 110 mm Sh
P-Audio High Output 6.5 Inch Precision Transducer w/1.75-in Voice Coil - 8 Ohms
Price is below average
Current Price
$19.65
Average
$59.22
Min Price
$19.65
Max Price
$78
Price dynamics
67%
Description
The P Audio SN6-600CA is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-600CA is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SN6-600CA has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-600CA features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-600CA utilizes P Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s precision round wire technology to maximize system conversion efficiency. The cone suspension is a high internal damping rubber design. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. SPECIFICATIONS Nominal diameter: 165 mm/6.5 in Power rating: 150 Watts(aes) Nominal impedance: 8 OHMS Sensitivity: 90 dB Frequency range: 80-3000 Hz Chassis type: Cast aluminum Magnet type: Ferrite Magnet weight: 2.6 kg/92.1 oz Voice coil diameter: 44.5 mm/1.75 in Coil material: SV-W Former material: Kapton Cone material: Paper Surround material: Rubber Suspension: Single X-max: 3 mm/0.12 in Gap depth: 6 mm/0.24 in Voice coil winding width: 12 mm/0.47 in Net Weight: 1.8 kg/4.0 lb Packing Dimension WxDxH: 180 x 180 x 110 mm Sh
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
okay today I want to talk about a topic that is long long overdue and that is the topic of 4-ohm vs. 8 ohms and which one do you want to own do you want to own you want to own the 4 ohm speaker or the 8 ohm speaker now I'm going to preface this video by making a statement and the statement is simply this everything that I want to show you and teach you today is based upon a loudspeaker designer's point of view not an amplifier designer not anything else just coming from strictly a loudspeaker designer point of view now it's no secret that Tecton design we focus on designing high performance loudspeakers and I emphasize that again high performance loudspeakers not mid performance not low performance we want to make high efficiency high performance loudspeakers I believe that that is the closest thing that can be replicated when we compare this to real music now the next thing I want to s

