PASS & SEYMOUR PS5266X CONNECTOR, POWER ENTRY, PLUG, 15A

Before wiring up any plug or connector make sure the power is off to the cable. Notice on the faceplate that it’s stamped with the NEMA configuration, amperage and voltage. Now taking a Philips head screwdriver, loosen the quick screws on the faceplate and remove the faceplate from the body housing. Next, taking your Philips head screwdriver loosen the two strain relief screws on your strain relief. Then take your cable, feed it through your strain relief and the body housing. Now strip the cord jacket according to the diagram found on the instruction sheet. You want your leads to be roughly one and a half inches. Remove the cord jacket. Your ground or your green wire will need to be cut approximately one inch long. Taking a pair of wire strippers, cut the wire. Now you will want to strip all of your wires approximately five eighths of an inch. Taking your wire strippers, place it on yo