PcProfessional Screen Protector (Set of 2) for HP ProOne 400 G3 20" All-in-One Touchscreen Desktop High Clarity Anti Scratch filter radiation+ microfiber cloth

To remove the cable cover, first place the unit face down on a soft, flat surface. Loosen the Torx security screw, if the customer has tightened the security screw. There are two locking latches on either side of the cable cover. To remove the cable cover, slide both latches toward the center into the unlocked position. Remove the cover from the unit. There are several small tabs on the top of the cable cover that fit into slots on the rear of the chassis. To replace the cable cover, align the tabs on the cover into their slots on the PC. Slide the locking latches back towards the sides of the unit to lock the cable cover in place. Tighten the Torx security screw, if it was tightened at removal. To remove the stand, first remove the cable cover. Press up on the latch for the stand to release the stand. Pull the stand off of the unit. There are two tabs on the top edge of the stand, that