Description
Description:
Our Plate Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. For example when hooking up a non pressurized furnace to an indoor boiler or for heating cold water before it goes into the hot water heater to eliminate the need for fuel to power your water heater. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.
Applications
The plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
60-Plate brazed plate heat exchanger
Plate dimensions: 4.25 x 12 inch (10.8 x 30.5 cm)
Inlet/Outlet sizes: 1 inch (2.54cm) male NPT(MPT) threaded
Max pressure: 652 lbs per sq in
Test pressure: 971 lbs per sq in
Package size: 13 x 5 x 7 inch (33 x 13 x 18 cm)
Weight: 19.8 lbs (9 kg)
Notice
1. Not to be used for transferring steam!
2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.
3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.
4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.
Our Plate Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. For example when hooking up a non pressurized furnace to an indoor boiler or for heating cold water before it goes into the hot water heater to eliminate the need for fuel to power your water heater. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.
Applications
The plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
60-Plate brazed plate heat exchanger
Plate dimensions: 4.25 x 12 inch (10.8 x 30.5 cm)
Inlet/Outlet sizes: 1 inch (2.54cm) male NPT(MPT) threaded
Max pressure: 652 lbs per sq in
Test pressure: 971 lbs per sq in
Package size: 13 x 5 x 7 inch (33 x 13 x 18 cm)
Weight: 19.8 lbs (9 kg)
Notice
1. Not to be used for transferring steam!
2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.
3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.
4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.
Pre-Owned 60 Plate Water to Water Brazed Plate Heat Exchanger Hard w/Studs US Stock
Current Price
$179.99
Average
$179.99
Min Price
$179.99
Max Price
$179.99
Description
Description:
Our Plate Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. For example when hooking up a non pressurized furnace to an indoor boiler or for heating cold water before it goes into the hot water heater to eliminate the need for fuel to power your water heater. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.
Applications
The plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
60-Plate brazed plate heat exchanger
Plate dimensions: 4.25 x 12 inch (10.8 x 30.5 cm)
Inlet/Outlet sizes: 1 inch (2.54cm) male NPT(MPT) threaded
Max pressure: 652 lbs per sq in
Test pressure: 971 lbs per sq in
Package size: 13 x 5 x 7 inch (33 x 13 x 18 cm)
Weight: 19.8 lbs (9 kg)
Notice
1. Not to be used for transferring steam!
2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.
3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.
4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.
Our Plate Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. For example when hooking up a non pressurized furnace to an indoor boiler or for heating cold water before it goes into the hot water heater to eliminate the need for fuel to power your water heater. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.
Applications
The plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
60-Plate brazed plate heat exchanger
Plate dimensions: 4.25 x 12 inch (10.8 x 30.5 cm)
Inlet/Outlet sizes: 1 inch (2.54cm) male NPT(MPT) threaded
Max pressure: 652 lbs per sq in
Test pressure: 971 lbs per sq in
Package size: 13 x 5 x 7 inch (33 x 13 x 18 cm)
Weight: 19.8 lbs (9 kg)
Notice
1. Not to be used for transferring steam!
2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.
3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.
4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
