Description
5-in-1 full-sized silver stickers for NEWEST Macbook Pro 13 inch with Touch bar, Touch ID Models: A1706/1989/A2159 released in 2016/2017/2018/2019+.
Package Included:
--1x High Clear Screen Protector
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x JRC wiping cloth
Before paste the skins, please noted two issues:
--After the 3M upper and bottom skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 1 mm gap to edge,please take care of its placeholder.
Paste Guide:
1) 100% clean up the laptop body
2) peel off and cut half of the backing paper, align its edges/corners/logo holes to the laptop body
3) if the alignment process is not good, you can slowly take it away, and then remove and re-alignment
4 if the edges, corners and LOGO cut openings have been aligned perfect,paste it to the computer
5) after it, then please tear off the remaining half of the backing paper
6) paste the other half of the skin at the same time
7) slowly use push card or JRC cloth gentle squeeze out the bubbles.
Screen Protector Instruction:
1)Position the screen protector on top of the screen making sure it match perfectly
2)100% Clean the screen with carefully with JRC cloth and alcohol
3)Peel off the half of backing film (sticker-1),we suggest you start from left to right, same time make sure the left and top line and camera hole is align ok. when these is full ok, slowly peel off the half backing film.
4)During the process, if you found there is dust inside of it, please find 3 in 1 sticker to absorb the dust carefully.
5)After you apply entire screen protector use the card or cloth to wipe out the bubble
6)If bubbles out, peel off the upper film(sticker-2),finish
Package Included:
--1x High Clear Screen Protector
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x JRC wiping cloth
Before paste the skins, please noted two issues:
--After the 3M upper and bottom skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 1 mm gap to edge,please take care of its placeholder.
Paste Guide:
1) 100% clean up the laptop body
2) peel off and cut half of the backing paper, align its edges/corners/logo holes to the laptop body
3) if the alignment process is not good, you can slowly take it away, and then remove and re-alignment
4 if the edges, corners and LOGO cut openings have been aligned perfect,paste it to the computer
5) after it, then please tear off the remaining half of the backing paper
6) paste the other half of the skin at the same time
7) slowly use push card or JRC cloth gentle squeeze out the bubbles.
Screen Protector Instruction:
1)Position the screen protector on top of the screen making sure it match perfectly
2)100% Clean the screen with carefully with JRC cloth and alcohol
3)Peel off the half of backing film (sticker-1),we suggest you start from left to right, same time make sure the left and top line and camera hole is align ok. when these is full ok, slowly peel off the half backing film.
4)During the process, if you found there is dust inside of it, please find 3 in 1 sticker to absorb the dust carefully.
5)After you apply entire screen protector use the card or cloth to wipe out the bubble
6)If bubbles out, peel off the upper film(sticker-2),finish
Premium 5 in 1 Full Size 3M Decals Skins Covers for MacBook Pro 13 Inch With Touch Bar (Apple Model Number A1706/A1989/A2159), with High Clear Screen Protector--Silver
Price is below average
Current Price
$25.99
Average
$27.56
Min Price
$20.99
Max Price
$59.99
Price dynamics
6%
Description
5-in-1 full-sized silver stickers for NEWEST Macbook Pro 13 inch with Touch bar, Touch ID Models: A1706/1989/A2159 released in 2016/2017/2018/2019+.
Package Included:
--1x High Clear Screen Protector
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x JRC wiping cloth
Before paste the skins, please noted two issues:
--After the 3M upper and bottom skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 1 mm gap to edge,please take care of its placeholder.
Paste Guide:
1) 100% clean up the laptop body
2) peel off and cut half of the backing paper, align its edges/corners/logo holes to the laptop body
3) if the alignment process is not good, you can slowly take it away, and then remove and re-alignment
4 if the edges, corners and LOGO cut openings have been aligned perfect,paste it to the computer
5) after it, then please tear off the remaining half of the backing paper
6) paste the other half of the skin at the same time
7) slowly use push card or JRC cloth gentle squeeze out the bubbles.
Screen Protector Instruction:
1)Position the screen protector on top of the screen making sure it match perfectly
2)100% Clean the screen with carefully with JRC cloth and alcohol
3)Peel off the half of backing film (sticker-1),we suggest you start from left to right, same time make sure the left and top line and camera hole is align ok. when these is full ok, slowly peel off the half backing film.
4)During the process, if you found there is dust inside of it, please find 3 in 1 sticker to absorb the dust carefully.
5)After you apply entire screen protector use the card or cloth to wipe out the bubble
6)If bubbles out, peel off the upper film(sticker-2),finish
Package Included:
--1x High Clear Screen Protector
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x JRC wiping cloth
Before paste the skins, please noted two issues:
--After the 3M upper and bottom skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 1 mm gap to edge,please take care of its placeholder.
Paste Guide:
1) 100% clean up the laptop body
2) peel off and cut half of the backing paper, align its edges/corners/logo holes to the laptop body
3) if the alignment process is not good, you can slowly take it away, and then remove and re-alignment
4 if the edges, corners and LOGO cut openings have been aligned perfect,paste it to the computer
5) after it, then please tear off the remaining half of the backing paper
6) paste the other half of the skin at the same time
7) slowly use push card or JRC cloth gentle squeeze out the bubbles.
Screen Protector Instruction:
1)Position the screen protector on top of the screen making sure it match perfectly
2)100% Clean the screen with carefully with JRC cloth and alcohol
3)Peel off the half of backing film (sticker-1),we suggest you start from left to right, same time make sure the left and top line and camera hole is align ok. when these is full ok, slowly peel off the half backing film.
4)During the process, if you found there is dust inside of it, please find 3 in 1 sticker to absorb the dust carefully.
5)After you apply entire screen protector use the card or cloth to wipe out the bubble
6)If bubbles out, peel off the upper film(sticker-2),finish
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
what's happening paying the nation Peter Brown Pandey here it's time to cover laptops my MacBook Pro here I love this MacBook Pro and this is a 2016 model what you might have noticed here is I've got this a Space Gray and I don't have a cover on it and that's a little strange for what I normally do and that's generally just because I really like the look of this sucker and so I didn't want to molest it or hide it in any way that I didn't need to but on on many occasions you do want some sort of protection and that's where I found this and I thought why not give this little thing a try this is by jrc where it appeared easy style it's a protection decal effectively made with 3m control tact skin and brand new it's not the cheapest I mean it's it's it's actually kind of price like some of those PU leather cases you know at about 30 bucks or 27 bucks or something like that under on Amazon a


Similar products
