Description
for Microsoft Surface Book 2 15 inch Protective Skin Sticker Decals Protector.
Compatible with:
-- for 2017/2018 Microsoft Surface Book 2 15 inch version(NOT for Suface BOOK 2 13 inch version)
Product Description:
This is a wear-resistant thin film solution that can effectively protect the Surface Book against the deleterious effects of grease, scratches, smudges, and color-fade that accrete over time.
Package Included:
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x Wiping cloth
--1x Clearning alcohol
Before paste the skins, please noted two issues:
--After the 3M skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 0.3 mm gap to edge,please take care of its placeholder.if you stick it to 100% fit one edge, In the process of using if often scraped to the side, may cause roll up
Pasting Instruction:
1. Please use wiping cloth to clean surface before pasting stickers.
2. Align UPPER sticker SURFACE LOGO hole>edges>corners to the laptop body.
3. Peel off and cut half side of backing paper; Align upper sticker to LOGO hole mainly, then edges/corners of laptop body, paste it on laptop easily.
4. Slowly peel off the rest of backing paper, paste the other half skin at the same time.
4-1.If the alignment process is not good, you can slowly take it away, then re-alignment, paste again.
5. Use wiping cloth wipe the laptop and squeeze out bubbles. Finally, Bubbles be disappeared; sticker fit SURFACE LOGO hole and laptop UPPER side well.
6. Paste another stickers in the same way.
7. If stickers do not paste well, please contact with seller soon.
Compatible with:
-- for 2017/2018 Microsoft Surface Book 2 15 inch version(NOT for Suface BOOK 2 13 inch version)
Product Description:
This is a wear-resistant thin film solution that can effectively protect the Surface Book against the deleterious effects of grease, scratches, smudges, and color-fade that accrete over time.
Package Included:
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x Wiping cloth
--1x Clearning alcohol
Before paste the skins, please noted two issues:
--After the 3M skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 0.3 mm gap to edge,please take care of its placeholder.if you stick it to 100% fit one edge, In the process of using if often scraped to the side, may cause roll up
Pasting Instruction:
1. Please use wiping cloth to clean surface before pasting stickers.
2. Align UPPER sticker SURFACE LOGO hole>edges>corners to the laptop body.
3. Peel off and cut half side of backing paper; Align upper sticker to LOGO hole mainly, then edges/corners of laptop body, paste it on laptop easily.
4. Slowly peel off the rest of backing paper, paste the other half skin at the same time.
4-1.If the alignment process is not good, you can slowly take it away, then re-alignment, paste again.
5. Use wiping cloth wipe the laptop and squeeze out bubbles. Finally, Bubbles be disappeared; sticker fit SURFACE LOGO hole and laptop UPPER side well.
6. Paste another stickers in the same way.
7. If stickers do not paste well, please contact with seller soon.
Premium Full Body 3M Protective Skin Decals Stickers for Microsoft Surface Book 2 15 inch - Sliver
Price is below average
Current Price
$15
Average
$18.5
Min Price
$15
Max Price
$21.99
Price dynamics
19%
Description
for Microsoft Surface Book 2 15 inch Protective Skin Sticker Decals Protector.
Compatible with:
-- for 2017/2018 Microsoft Surface Book 2 15 inch version(NOT for Suface BOOK 2 13 inch version)
Product Description:
This is a wear-resistant thin film solution that can effectively protect the Surface Book against the deleterious effects of grease, scratches, smudges, and color-fade that accrete over time.
Package Included:
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x Wiping cloth
--1x Clearning alcohol
Before paste the skins, please noted two issues:
--After the 3M skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 0.3 mm gap to edge,please take care of its placeholder.if you stick it to 100% fit one edge, In the process of using if often scraped to the side, may cause roll up
Pasting Instruction:
1. Please use wiping cloth to clean surface before pasting stickers.
2. Align UPPER sticker SURFACE LOGO hole>edges>corners to the laptop body.
3. Peel off and cut half side of backing paper; Align upper sticker to LOGO hole mainly, then edges/corners of laptop body, paste it on laptop easily.
4. Slowly peel off the rest of backing paper, paste the other half skin at the same time.
4-1.If the alignment process is not good, you can slowly take it away, then re-alignment, paste again.
5. Use wiping cloth wipe the laptop and squeeze out bubbles. Finally, Bubbles be disappeared; sticker fit SURFACE LOGO hole and laptop UPPER side well.
6. Paste another stickers in the same way.
7. If stickers do not paste well, please contact with seller soon.
Compatible with:
-- for 2017/2018 Microsoft Surface Book 2 15 inch version(NOT for Suface BOOK 2 13 inch version)
Product Description:
This is a wear-resistant thin film solution that can effectively protect the Surface Book against the deleterious effects of grease, scratches, smudges, and color-fade that accrete over time.
Package Included:
--1x Upper Body Skin Cover
--1x Bottom Body Skin Cover
--1x Full size Palm Rest Cover Skin
--1x Trackpad Protector Skin
--1x Wiping cloth
--1x Clearning alcohol
Before paste the skins, please noted two issues:
--After the 3M skin paste completed, do not re-lift, otherwise, the skins will be damaged.
--We design the product off 0.3 mm gap to edge,please take care of its placeholder.if you stick it to 100% fit one edge, In the process of using if often scraped to the side, may cause roll up
Pasting Instruction:
1. Please use wiping cloth to clean surface before pasting stickers.
2. Align UPPER sticker SURFACE LOGO hole>edges>corners to the laptop body.
3. Peel off and cut half side of backing paper; Align upper sticker to LOGO hole mainly, then edges/corners of laptop body, paste it on laptop easily.
4. Slowly peel off the rest of backing paper, paste the other half skin at the same time.
4-1.If the alignment process is not good, you can slowly take it away, then re-alignment, paste again.
5. Use wiping cloth wipe the laptop and squeeze out bubbles. Finally, Bubbles be disappeared; sticker fit SURFACE LOGO hole and laptop UPPER side well.
6. Paste another stickers in the same way.
7. If stickers do not paste well, please contact with seller soon.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
[Music] hi everyone in today's video I'm gonna unbox apply and also reveal full-body scans for my macbook pro 2019 and this is the silver model I bought the skin on Thomas and they also had the space gray color available and can you tell there is the skin on it looks pretty good huh like the color it's pretty much like exactly the same the only difference is that obviously it reflects light differently than you know original aluminum so does the only difference so if you use this thing for example it's not gonna look exactly the same depends on the light basically but I mean looks incredible like you can you can tell that there was skin on it even though it's not cut perfectly I mean to be honest like I maybe didn't do the best shell pop like the de wrap divine will scan let's say you can see like around applo gets it's not perfectly applied but you know I just if I would want this to b


Similar products
