RepairPartsPlus iPad Mini 1 Screen Replacement Glass Touch Digitizer Premium Repair Kit with Tools and Home Button/Ic Connector (Black)

this is a guide on replacing the front glass digitizer and the LCD on the Apple iPad Mini make sure to turn off the device by holding the power button at the top and confirming the shutdown on screen the front glass which is also the touch sensitive digitizer is glued on and requires some heating prior to opening using a heat gun or a hairdryer thoroughly warm up the edges of the front glass make sure to be consistent and go around the entire perimeter focusing heat on one point for too long may cause further damage to the glass or the LCD underneath once properly warmed up place a suction cup at the top left corner and gently pull away this will expose the left edge sufficiently enough to get in with a flat metal tool like a putty knife continue opening by sliding the putty knife across the top edge it is advised to use the heat gun to keep the glue soft as you move along the edge with