Replacement 6pcs/set Bottom case Screws + 1pcs Dual Sided 5 point Pentalobe Screwdriver for MacBook Retina 13-inch A1706 (EMC 3071) (EMC 3163) with Touch Bar,A1989 EMC(3214) MR9Q2LL/A 2018 year (Gray)

welcome to the mid-2017 13 inch touch bar take up our guide first remove the six pedal herb screws from the bottom pan [Music] [Music] there are two clips on each side of the bottom pin that have to be unsnapped use your flat tool to pry up the bottom pan gently to unsnap them once the clips are unsnapped you can then slide the bottom pan away from the hinge and then lift it up and out before you begin working on a logic board you will want to unplug the battery use some tweezers to disconnect the flex cable located here [Music] [Music] then use a t4 screwdriver to remove the screw holding down the battery and then bin back the flex cable for the battery away from the board next remove the t4 screws holding down the display cable [Music] and then unplug the cable [Music] next remove the t4 screws holding down the Kings covers [Music] [Music] the next step is to unplug all the cables fro