Description
Note:
Picture shown, which mainly lies in different effect and computer monitor.
Constructions:
Step 1:Place and spread the photo booth onto a flat surface. Make sure that the top faces upwards and the zippers
on the lower bottom is closed beforehand .
Step 2:Connect the controller and power adapter before you connect the power.
Step 3:When everything is ready , connect the power. After 1-2 minutes , you will get a wonderful photo booth.
Please note that, never allow the photo booth to cover the air intake of the blower during blowing.
Step 4:If you are using the booth in an outdoor environment. Use the ropes in the package to fasten the booth
through the nylon tarpaulin webbing at the bottom of the booth.
Note:If you still have questions, you can open this link to see the complete installation video or contact the manufacturer:
https://youtu.be/efWtE2djwW4
Care instructions:
1. Do not open the package with sharp tools.
2. Place the booth on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects
which could damage to the product!
3. Connect the power cable and blow the tent about 1-2 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.
Picture shown, which mainly lies in different effect and computer monitor.
Constructions:
Step 1:Place and spread the photo booth onto a flat surface. Make sure that the top faces upwards and the zippers
on the lower bottom is closed beforehand .
Step 2:Connect the controller and power adapter before you connect the power.
Step 3:When everything is ready , connect the power. After 1-2 minutes , you will get a wonderful photo booth.
Please note that, never allow the photo booth to cover the air intake of the blower during blowing.
Step 4:If you are using the booth in an outdoor environment. Use the ropes in the package to fasten the booth
through the nylon tarpaulin webbing at the bottom of the booth.
Note:If you still have questions, you can open this link to see the complete installation video or contact the manufacturer:
https://youtu.be/efWtE2djwW4
Care instructions:
1. Do not open the package with sharp tools.
2. Place the booth on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects
which could damage to the product!
3. Connect the power cable and blow the tent about 1-2 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.
SAYOK New Inflatable Photo Booth Spiral Inflatable Photo Wall with Inner Air Blower for Weddings Event Promotions Advertising
Current Price
$539
Average
$522.33
Min Price
$509
Max Price
$539
Price dynamics
3%
Description
Note:
Picture shown, which mainly lies in different effect and computer monitor.
Constructions:
Step 1:Place and spread the photo booth onto a flat surface. Make sure that the top faces upwards and the zippers
on the lower bottom is closed beforehand .
Step 2:Connect the controller and power adapter before you connect the power.
Step 3:When everything is ready , connect the power. After 1-2 minutes , you will get a wonderful photo booth.
Please note that, never allow the photo booth to cover the air intake of the blower during blowing.
Step 4:If you are using the booth in an outdoor environment. Use the ropes in the package to fasten the booth
through the nylon tarpaulin webbing at the bottom of the booth.
Note:If you still have questions, you can open this link to see the complete installation video or contact the manufacturer:
https://youtu.be/efWtE2djwW4
Care instructions:
1. Do not open the package with sharp tools.
2. Place the booth on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects
which could damage to the product!
3. Connect the power cable and blow the tent about 1-2 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.
Picture shown, which mainly lies in different effect and computer monitor.
Constructions:
Step 1:Place and spread the photo booth onto a flat surface. Make sure that the top faces upwards and the zippers
on the lower bottom is closed beforehand .
Step 2:Connect the controller and power adapter before you connect the power.
Step 3:When everything is ready , connect the power. After 1-2 minutes , you will get a wonderful photo booth.
Please note that, never allow the photo booth to cover the air intake of the blower during blowing.
Step 4:If you are using the booth in an outdoor environment. Use the ropes in the package to fasten the booth
through the nylon tarpaulin webbing at the bottom of the booth.
Note:If you still have questions, you can open this link to see the complete installation video or contact the manufacturer:
https://youtu.be/efWtE2djwW4
Care instructions:
1. Do not open the package with sharp tools.
2. Place the booth on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects
which could damage to the product!
3. Connect the power cable and blow the tent about 1-2 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
