Description
Semoic,a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. SWR Power Meter Meter Receiving Useful External Display S Meters for Yaesu FT-857 FT-897 FT-897D FT-897D Metal Stationary Wave Ratio(black)
external display settings header methods:
Receive Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3, Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: Buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF: Turn off the meter.
4, Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3, Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
If you can not find the numbers 60, 61 menu, is this two radio hidden menu.
Long press the F key to open the menu settings, the 1st menu set to ON, press the F key to open the exit to save the hidden menu
Pakage list:
1 x SWR power meter display
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
external display settings header methods:
Receive Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3, Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: Buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF: Turn off the meter.
4, Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3, Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
If you can not find the numbers 60, 61 menu, is this two radio hidden menu.
Long press the F key to open the menu settings, the 1st menu set to ON, press the F key to open the exit to save the hidden menu
Pakage list:
1 x SWR power meter display
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Semoic SWR Power Meter Meter Receiving Useful External Display S Meters for Yaesu FT-857 FT-897 FT-897D FT-897D Metal Stationary Wave Ratio(Black)
Current Price
$16.78
Average
$15.67
Min Price
$14.8
Max Price
$16.78
Price dynamics
7%
Description
Semoic,a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. SWR Power Meter Meter Receiving Useful External Display S Meters for Yaesu FT-857 FT-897 FT-897D FT-897D Metal Stationary Wave Ratio(black)
external display settings header methods:
Receive Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3, Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: Buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF: Turn off the meter.
4, Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3, Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
If you can not find the numbers 60, 61 menu, is this two radio hidden menu.
Long press the F key to open the menu settings, the 1st menu set to ON, press the F key to open the exit to save the hidden menu
Pakage list:
1 x SWR power meter display
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
external display settings header methods:
Receive Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3, Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: Buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF: Turn off the meter.
4, Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings
1, Press [FUNC] key to enter the setup menu, enable the extended menu.
2, Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3, Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
If you can not find the numbers 60, 61 menu, is this two radio hidden menu.
Long press the F key to open the menu settings, the 1st menu set to ON, press the F key to open the exit to save the hidden menu
Pakage list:
1 x SWR power meter display
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hello everybody Steve here from droid master tech review today I'm going to be reviewing the LD g FTL meter for the Yazoo ft 8 97 and the 857 this is a proprietary meter and can only be used with those two radios they make two different versions this is the four and a half inch version the large meter and they make a smaller one two and a half inch it comes in a kind of a big box real nice packaging it has a DC power connector that you can connect to 12 volts with a plugin in the back I'll show you where that goes in a minute and also it comes with the think that's a one-eighth inch jack standard you know a little phono plug type that fits on the radio and in the back there's a little connector underneath the front panel of the radio the 897 and the 857 you plug it in and then you plug it into the back so here's take a look at the front of the meter here to give you a good idea of what


