Description
The Furrion compatible Backup Camera housing comes on many new Pre-wired RVs and Trailers, the half moon bracket FRCBRKT-BL. Our plate and connector make a super simple plug and play with the Furrion mount. This comes with screws and nuts to secure your camera to the mount. The holes in our bracket are moon shaped to accomidate most cameras. Fasten YOUR camera to OUR plate through the holes in our plate. They are large and will accomidate most cameras
Unlike other adapter brackets you do not have to remove the Furrion housing leaving an eyesoar partial Furrion Mount with a flat plate adapter. Mount our bracket to the halfmoon part (as seen in the product pictures).The plate fits perfectly in the Furrion housing and a camera mounts right to it. We also supply you with the plug and play wiring as well. NO drilling or wiring requried
For install just remove 4 screws from the Furrion plate and swap out our plate with the same 4 screws, the holes are perfect fit. Install is a matter of minutes. For the power there is a simple plug adapter that will fit most cameras. If your camera has two bare wires (red and black) instead of a plug, simply snip the end off our cable (as seen in the product pictures) and you can wire to that as well!
With this plate and adapter connect your camera and use it as observation cameras for driving down the road and changing lanes
Our mount is coated to last in any weather conditions. All our mounts are proudly made here in the USA
Furrion and the Furrion logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
NOTE: This is NOT a Furrion mount or a camera. Only adapter bracket,cable,screws to mount YOUR camera to a Furrion mount YOU have
Unlike other adapter brackets you do not have to remove the Furrion housing leaving an eyesoar partial Furrion Mount with a flat plate adapter. Mount our bracket to the halfmoon part (as seen in the product pictures).The plate fits perfectly in the Furrion housing and a camera mounts right to it. We also supply you with the plug and play wiring as well. NO drilling or wiring requried
For install just remove 4 screws from the Furrion plate and swap out our plate with the same 4 screws, the holes are perfect fit. Install is a matter of minutes. For the power there is a simple plug adapter that will fit most cameras. If your camera has two bare wires (red and black) instead of a plug, simply snip the end off our cable (as seen in the product pictures) and you can wire to that as well!
With this plate and adapter connect your camera and use it as observation cameras for driving down the road and changing lanes
Our mount is coated to last in any weather conditions. All our mounts are proudly made here in the USA
Furrion and the Furrion logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
NOTE: This is NOT a Furrion mount or a camera. Only adapter bracket,cable,screws to mount YOUR camera to a Furrion mount YOU have
Tadibrothers Furrion Compatible Backup Camera Bracket Adapter with a Power Adapter for Pre-Wired RV or Trailer with a FRCBRKT-BL
Current Price
$49.99
Average
$43.32
Min Price
$29.99
Max Price
$49.99
Price dynamics
13%
Description
The Furrion compatible Backup Camera housing comes on many new Pre-wired RVs and Trailers, the half moon bracket FRCBRKT-BL. Our plate and connector make a super simple plug and play with the Furrion mount. This comes with screws and nuts to secure your camera to the mount. The holes in our bracket are moon shaped to accomidate most cameras. Fasten YOUR camera to OUR plate through the holes in our plate. They are large and will accomidate most cameras
Unlike other adapter brackets you do not have to remove the Furrion housing leaving an eyesoar partial Furrion Mount with a flat plate adapter. Mount our bracket to the halfmoon part (as seen in the product pictures).The plate fits perfectly in the Furrion housing and a camera mounts right to it. We also supply you with the plug and play wiring as well. NO drilling or wiring requried
For install just remove 4 screws from the Furrion plate and swap out our plate with the same 4 screws, the holes are perfect fit. Install is a matter of minutes. For the power there is a simple plug adapter that will fit most cameras. If your camera has two bare wires (red and black) instead of a plug, simply snip the end off our cable (as seen in the product pictures) and you can wire to that as well!
With this plate and adapter connect your camera and use it as observation cameras for driving down the road and changing lanes
Our mount is coated to last in any weather conditions. All our mounts are proudly made here in the USA
Furrion and the Furrion logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
NOTE: This is NOT a Furrion mount or a camera. Only adapter bracket,cable,screws to mount YOUR camera to a Furrion mount YOU have
Unlike other adapter brackets you do not have to remove the Furrion housing leaving an eyesoar partial Furrion Mount with a flat plate adapter. Mount our bracket to the halfmoon part (as seen in the product pictures).The plate fits perfectly in the Furrion housing and a camera mounts right to it. We also supply you with the plug and play wiring as well. NO drilling or wiring requried
For install just remove 4 screws from the Furrion plate and swap out our plate with the same 4 screws, the holes are perfect fit. Install is a matter of minutes. For the power there is a simple plug adapter that will fit most cameras. If your camera has two bare wires (red and black) instead of a plug, simply snip the end off our cable (as seen in the product pictures) and you can wire to that as well!
With this plate and adapter connect your camera and use it as observation cameras for driving down the road and changing lanes
Our mount is coated to last in any weather conditions. All our mounts are proudly made here in the USA
Furrion and the Furrion logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
NOTE: This is NOT a Furrion mount or a camera. Only adapter bracket,cable,screws to mount YOUR camera to a Furrion mount YOU have
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
[Music] you hi this is Tamir from Taddy Brothers and in this video I'll show you how to set up an RV backup camera bracket onto a fury on mounting kit that's for those people that have that Half Moon bracket in the back of their RV pre-wired with the socket for the fury on cable this will show you how to set that up before we get started the first thing I want to remind you guys is or actually give you a little tip don't be scared to try stuff this is strong metal it's not going to break if you find some other way to set it up better than the way I'm showing in a video go ahead it's not gonna get ruined and if it does you have a warranty on it the other thing is bent just everything before you install it whether it's a wired or wireless system you want to see how it works before you permanently mount it in the vehicle it'll give you a better understanding of how the system works and usu


