Description

Screw and Snap Clips

Screw and Snap clip dispensers, can "cut installation time by up to one half" that of traditional loose screw clip methods. The plastic dispenser holds a strip of 10 connected clips with hardened Philips hex washer head screws. The unique features of Screw and Snap clips help to eliminate lost clips and reduce inventory shrinkage. Screw and Snap clips can be used to attach cable to wood, masonry and even light concrete (with a drilled .138" pilot required)*

Application

Screw and Snap Clips secure coaxial drop wire to subscriber's premises. Convenient strips of nine clips snap off after installation. For MDU applications, 2 or 3 clips may be ganged together.

DESIGN FEATURES

Screws are mechanically galvanized for extended rust protection
Clips are made of a high quality, rust free aluminum
Clips are scored to facilitate clean and easy separation from strip
Plastic grommet holds screw firmly in place and prevents torquing during installation
Plastic dispenser sleeve protects ganged clips prior to installation and prevents clips from spinning when installed with a power drill
Clips can be advanced one at a time from the dispenser for ease of installation and elimination of waste
Size is stamped on each clip assuring the use of the correct size for the cable type
Properly selected clip size will effectively hold the cable and prevent physical cable distortion

Thomas & Betts 24-88013, Screw & Snap Clips for Series 6 Cable, 3/4" Screw Qty 30

Get price

Current Price

$20

Average

$20

Min Price

$20

Max Price

$20

Description

Screw and Snap Clips

Screw and Snap clip dispensers, can "cut installation time by up to one half" that of traditional loose screw clip methods. The plastic dispenser holds a strip of 10 connected clips with hardened Philips hex washer head screws. The unique features of Screw and Snap clips help to eliminate lost clips and reduce inventory shrinkage. Screw and Snap clips can be used to attach cable to wood, masonry and even light concrete (with a drilled .138" pilot required)*

Application

Screw and Snap Clips secure coaxial drop wire to subscriber's premises. Convenient strips of nine clips snap off after installation. For MDU applications, 2 or 3 clips may be ganged together.

DESIGN FEATURES

Screws are mechanically galvanized for extended rust protection
Clips are made of a high quality, rust free aluminum
Clips are scored to facilitate clean and easy separation from strip
Plastic grommet holds screw firmly in place and prevents torquing during installation
Plastic dispenser sleeve protects ganged clips prior to installation and prevents clips from spinning when installed with a power drill
Clips can be advanced one at a time from the dispenser for ease of installation and elimination of waste
Size is stamped on each clip assuring the use of the correct size for the cable type
Properly selected clip size will effectively hold the cable and prevent physical cable distortion

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

Startech Estie series fittings star tech cable fittings are designed for tech cables corrugated metal clad cables and a CWU cables to select the proper StarTek fitting you must know the outside diameter of the cable including its outer jacket with this information refer to the instruction sheet supplied with the fitting to help you select the proper StarTek fitting you can also refer to the cable range engraved on the startx gland nut to match the correct fitting with the cable thomas and betts also offers a star tech wraparound ruler available through your local distributor to help you select the proper star tech fitting if you do not know the cable diameter on hand we first determine the proper StarTek fitting we can install the fitting to the enclosure with a lock nut that we first manually adjust and then tighten using a screwdriver and hammer we calculate the strip length of the ca