USG PoE Splitter to Power Non-PoE Cameras: Splits Incoming PoE Signal to 12V DC Power + RJ45 Ethernet Video, 10/100Mbps, 2A, 24W, IEEE 802.3af/at, True Plug-&-Play, for HD IP Video Surveillance

Hi there, this is Joe. This video I'm going to demonstrate how to use PoE injector and PoE splitter. PoE, power over Internet, allows us to use a single internet cable to send both power and network from the center to the remote IP device. In this case we are using the IP camera so the IP camera will get the power and data from the center. All right. Let's see what we need. This is the PoE injector from the Fastcabling and you can see that there's AC outlets which will connect these PoE injector to the AC test appear in the other get the power also Tia has two lengths to port three four five pots once the length which will be connecting to the link network receiving the data and after the injector compared both power and data it will sense to the purely pot to the remote IP device all right now this is the purest beater you can see the purest pita also have one at v4 v pot if you recei